Class 2 Device Recall Atellica CH Immunoglobulin M_2 (IgM_2)

• Date Initiated by Firm: December 15, 2023
• Date Posted: February 07, 2024
• Recall Status: Open, Classified
• Recall Number: Z-1003-2024
• Recall Event ID: 93782
• 510(K)Number: K151767 K992662
• Product Classification: Method, nephelometric, immunoglobulins (g, a, m) - Product Code CFN
• Product: Total immunoglobulin M (IgM total) IVD, kit, nephelometry/turbidimetry
• Code Information: Siemens Material Number (SMN): 11097620; UDI DI: 00630414595627; Lot No. (Exp. Date): 221764 (10/01/2023), 221829 (02/01/2024), 231915 (06/01/2024), 232025 (11/01/2024).
• Recalling Firm/ Manufacturer: Siemens Healthcare Diagnostics, Inc.; 511 Benedict Ave; Tarrytown NY 10591-5005
• For Additional Information Contact: Jeff Semone; 914-631-8000
• Manufacturer Reason for Recall: Potential for a negative bias with quality control (QC) and patient sample results when using the Atellica CH Immunoglobulin M_2 (IgM_2) reagent.
• FDA Determined Cause: Under Investigation by firm
• Action: An Urgent Medical Device Correction notification letter dated 12/19/23 was sent to customers. Actions to be Taken by the Customer: Siemens Healthineers recommends batch testing samples for Atellica CH IgM_2 as follows: 1. Remove and discard any Atellica CH IgM_2 reagent packs onboard the analyzer. 2. Load a single fresh Atellica CH IgM_2 reagent pack onto the analyzer. 3. Perform a Lot calibration and process Quality Control (QC). 4. Immediately process a batch of patient samples and conclude with a repeat run of QC. Patient results should not be reported until the QC performed at the end of the batch run has been assessed. - If the QC results are within the established range, patient results can be reported. - If the QC results are not within the established range, do not report patient results and repeat steps 1 4 above. 5. Remove and discard the Atellica CH IgM_2 reagent pack at the end of the batch run. Siemens Healthineers does not recommend using the ADVIA IgM_2 reagent on the Atellica CH or Atellica CI Analyzers. Please review this letter with your Medical Director to determine the appropriate course of action, including for any previously generated results, if applicable. Complete and return the Field Correction Effectiveness Check Form attached to this letter within 30 days. If you have received any complaints of illness or adverse events associated with the products listed in Table 1, immediately contact your local Siemens Healthineers Customer Care Center or your local Siemens Healthineers technical support representative. Please retain this letter with your laboratory records and forward this letter to those who may have received this product. We apologize for the inconvenience this situation may cause. If you have any questions, please contact your Siemens Healthineers Customer Care Center or your local Siemens Healthineers technical support representative.
• Quantity in Commerce: 7,075 units (927 US, 6148 OUS)
• Distribution: Worldwide - US Nationwide distribution including in the states of AL, AR, AZ, CA, CO, CT, DC, FL, GA, IA, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS, MT, NC, NE, NH, NJ, NM, NV, NY, OH, OR, PA, SC, TN, TX, UT, VA, WA, WI, and PR; The countries of Argentina, Australia, Austria, Bahrain, Belgium, Brazil, Canada, Chile, Colombia, Croatia, Curacao, Czech Republic, Denmark, Egypt, Estonia, Finland France, Germany, Greece, Hong Kong, Hungary, India, Iran, Ireland, Israel, Italy, Ivory Coast, Japan, Jordan, Kenya, Kuwait, Latvia, Macedonia, Mexico, Morocco, Netherlands, New Zealand, Norway, Oman, P.R. China, Pakistan, Paraguay, Peru, Poland, Portugal, Republic South Korea, Romania, Saudi Arabia, Serbia, Singapore, Slovakia, South Africa, Spain, Sweden, Switzerland, Turkey, U.A.E, United Kingdom, Uruguay, Vatican City, Vietnam, Zaire.
• Total Product Life Cycle: TPLC Device Report

¹ A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
² Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
³ The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.

• 510(K) Database: 510(K)s with Product Code = CFN and Original Applicant = BAYER CORP.; 510(K)s with Product Code = CFN and Original Applicant = SIEMENS HEALTHCARE DIAGNOSTICS, INC.