| Date Initiated by Firm | June 25, 2025 |
| Date Posted | August 05, 2025 |
| Recall Status1 |
Open3, Classified |
| Recall Number | Z-2271-2025 |
| Recall Event ID |
97162 |
| 510(K)Number | K023764 |
| Product Classification |
Analyzer, chemistry (photometric, discrete), for clinical use - Product Code JJE
|
| Product | DxI 600 Access Immunoassay Analyzer W/Spot B, Part Number A71460 |
| Code Information |
UDI-DI: 15099590369224;
Serial Numbers: 902515
902070
902390
902369
902429
902529
902598
902597
902275
902291
902339
902502
902278
902283
902329
902340
902528
902534
902392
902526
902527
902248
902249
902523
902522
902225
902524
902586
902427
902424
902505
902455
902413
902414
901697
902578
902579
902303
902264
902265
902428
902089
902227
902226
902228
902229
902256
902257
902075
902323
902197
902231
902270
902271
902301
902305
902273
902362
902342
901898
902545
902383
902530
902531
902416
901890
902581
902318
902316
902317
902454
902453
902451
902504
902514
902525
902535
902274
902102
902224
902356
902566
902223
902404
902307
902306
902083
902085
902328
902351
902350
902434
902433
902516
902518
902322
902391
902204
902415
902292
902294
902378
902379
902382
902334
902335
902532
902222
902365
902326
902327
902425
902293
902420
902419
902418
902246
902555
902558
902564
902588
902421
902432
902244
902245
902363
902364
902260
902290
902296
902519
902521
902559
902478
902456
902457
902549
902554
902435
902450
902253
902254
902582
902583
902352
902353
902357
902360
902361
902399
902547
902596
902252
902393
902398
902405
902426
902368
902412
902492
902281
902219
902220
902511
902610
902635
902625
902614
902615
902621
902620
902634
902609
902606
902601
902603
902604 |
| FEI Number |
2122870
|
Recalling Firm/ Manufacturer |
Beckman Coulter, Inc. 1000 Lake Hazeltine Dr Chaska MN 55318-1037
|
| For Additional Information Contact | Ian Pilcher 952-448-4848 |
Manufacturer Reason for Recall | Beckman Coulter has identified that the UniCel DxI 600/800 systems with linear slide PnP gantries running software versions 5.7 and up faced incorrect PnP X-motor current settings where the PnP X-motor current incorrectly resets to 1.5A (instead of the required 2.0A) because the software overwrites the factory setting during installs or upgrades. This anomaly causes increased PnP motion errors which could lead to delays in reporting patient sample results if unnoticed. |
FDA Determined Cause 2 | Device Design |
| Action | An URGENT MEDICAL DEVICE RECALL notification dated 6/25/25 was sent to customers.
ACTION:
If your laboratory encounters any of the events described in this letter:
" Perform a system initialization to resume normal operation.
o If repeated initialization attempts fail, contact Customer Technical Support.
" Repeat testing for any cancelled tests.
" No action is required if your laboratory has not observed the events listed above
ESOLUTION:
"A Beckman Coulter representative will schedule the modification installation when it is available.
Please share this information with your laboratory staff and retain this notification as part of your laboratory Quality System documentation. If you have forwarded any of the affected product listed above to another laboratory, please provide them a copy of this letter.
So that we are assured you have received this important communication, please respond within 10 days in one of the following ways:
" Electronically, if you received this communication via email.
" Manually, complete and return the enclosed Response Form.
If you have any questions regarding this notice, please contact our Customer Support:
" From our website: http://www.beckmancoulter.com |
| Quantity in Commerce | 177 systems |
| Distribution | Worldwide distribution - US Nationwide. |
| Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.
|
| 510(K) Database | 510(K)s with Product Code = JJE
|