| Date Initiated by Firm | December 05, 2025 |
| Date Posted | January 08, 2026 |
| Recall Status1 |
Open3, Classified |
| Recall Number | Z-0999-2026 |
| Recall Event ID |
98230 |
| 510(K)Number | K173639 |
| Product Classification |
Interventional fluoroscopic x-ray system - Product Code OWB
|
| Product | LUMINOS Lotus Max, Model 11574100 and Luminos dRF Max, Model 10762471 |
| Code Information |
(01)04056869269931(21)10330 |
| FEI Number |
2240869
|
Recalling Firm/ Manufacturer |
Siemens Medical Solutions USA, Inc 40 Liberty Blvd Malvern PA 19355-1418
|
| For Additional Information Contact | 610-219-4834 |
Manufacturer Reason for Recall | A potential issue associated with LUMINOS Lotus Max and Luminos dRF Max
systems with software version VF11 with bucky wall stand for mobile detectors and without ceiling stand .When
switching quickly between organ programs (OGPs) the collimation may be incorrect. |
FDA Determined Cause 2 | Radiation Control for Health and Safety Act |
| Action | The Customer Advisory Notice (CAN) was sent to the
affected customer on December 5, 2025. The CAN
notifies the customer of the problem and provides steps
the user should take to avoid the problem until the
resolution software update is available.
When switching within five seconds from a table related OGP to a bucky wall stand
related OGP with top-alignment and then back to a table related OGP, it may
happen, that the collimation is not adapted to the limitations of the detector. The
active radiation field may thus extend beyond the limits of the detector, resulting
in radiation outside of the area of the detector.
|
| Quantity in Commerce | U.S.: 1, OUS: 95 |
| Distribution | U.S. and OUS |
| Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.
|
| 510(K) Database | 510(K)s with Product Code = OWB
|