Date Initiated by Firm | August 21, 2007 |
Date Posted | December 22, 2007 |
Recall Status1 |
Terminated 3 on June 16, 2008 |
Recall Number | Z-0534-2008 |
Recall Event ID |
44734 |
Product Classification |
PEEP valve, ventilator accessory - Product Code BYE
|
Product | Ambu, Positive End Expiratory Pressure (PEEP) Valves, PEEP Valve 10, 22/18 mm, REF 000 138 000, Manufacturer: Ambu International A/S, DK2750 Ballerup USA: Ambu Inc. (Ambu USA) Linthicum, MD 21090-1356 USA, Made in Denmark |
Code Information |
Catalog Number: A000138000, Lot Number: 010017. |
Recalling Firm/ Manufacturer |
Ambu Incorporated 6740 Baymeadow Drive Glen Burnie MD 21060-6412
|
For Additional Information Contact | Sanjay Parikh 410-768-6464 Ext. 1136 |
Manufacturer Reason for Recall | Lower pressure than expected: Medical device for respiratory care may leak and not register accurate flow settings that affect patient respiration. |
FDA Determined Cause 2 | Process design |
Action | Ambu notified consignees with a letter dated 08/21/07 and flagged as Trouble Shooting Guide. The letter advised that some valves do not hold the set PEEP level under certain conditions and consignees were further advised to consider the guideline as an addendum to existing directions for use. Consignees were instructed to return (to Ambu) for replacement the identified lots listed in the notification and confirm receipt of the advisory by e-m or fax.
Ambu subsequently identified additional lots of valves and replacement valve parts for recall and notified all consignees by "Urgent Device Recall" letter dated 11/29/07. The letter advised healthcare practitioners of the impact on patient treatment that may result in less than effective treatment. Consignees were further advised to cease use of the device and return for replacement. |
Quantity in Commerce | 197 total |
Distribution | Nationwide. |
Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|