| Model Number |
321.03.350 |
| Medical Device Problem Code |
Insufficient Device Problem Information (3190)
|
| Health Effect - Clinical Code |
Joint Dislocation (2374)
|
| Date of Event |
03/09/2026
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
Per (b)(4) initial report.Additional information, including post primary and pre revision x-rays, operative notes (primary and revision), patient activity level, weight and medical history, whether the patient followed correct post-op protocol, whether the patient experienced any slips / falls or other trauma post primary surgery, what was implanted at the revision, what was the patient doing at the time of the dislocation and an update on the patient post revision has been requested in order to progress with the investigation of this event, and if received, will be provided in a supplemental report upon completion of the investigation.The appropriate device details have been provided and the relevant device manufacturing records will be identified and reviewed.Please note: this report is filed with the fda due to an adverse event experienced with a device that is similar to those placed on the market in the usa, however, this event occurred outside of the usa.The submission of this report does not constitute an admission that the device, reporting entity, entities representative or distributor caused or contributed to this event.
|
| |
|
Event or Problem Description
|
|
Trinity revision (ops used in primary) of the ecima liner and cup after approximately 1 year due to dislocation.
|
| |
|
Additional Manufacturer Narrative
|
|
Per (b)(4) final report.Additional information, including post primary and pre revision x-rays, operative notes (primary and revision), patient activity level, weight and medical history, whether the patient followed correct post-op protocol, whether the patient experienced any slips / falls or other trauma post primary surgery, what was implanted at the revision, what was the patient doing at the time of the dislocation and an update on the patient post revision was requested in order to progress with the investigation of this event, however, this information could not be provided and thus the scope of the investigation was limited.The appropriate device details were provided and the relevant device manufacturing records have been identified and reviewed.All parts associated with these records conformed to material and dimensional specification at the time of manufacture.A review of product history records was performed which revealed that no anomalies were observed in the device history records of ops insight, and ops acetabular guide, which may have caused or contributed to this event.The ops insight plan was made in accordance with specification.There is no indication that ops would have contributed to this event.Based on the available information, no further investigation can be conducted and the root cause of the reported dislocation could not be determined.This case is now considered closed, however, should any additional information be provided then this case may be re-opened for further investigation.Please note: this report is filed with the fda due to an adverse event experienced with a device that is similar to those placed on the market in the usa, however, this event occurred outside of the usa.The submission of this report does not constitute an admission that the device, reporting entity, entities representative or distributor caused or contributed to this event.
|
| |
|
Event or Problem Description
|
|
Trinity revision (ops used in primary) of the ecima liner and cup after approximately 1 year due to dislocation.
|
| |
|
Search Alerts/Recalls
|
|