Class 2 Device Recall Revolution CT

• Date Initiated by Firm: March 26, 2026
• Date Posted: May 08, 2026
• Recall Status: Open, Classified
• Recall Number: Z-2150-2026
• Recall Event ID: 98738
• 510(K)Number: K133705 K163213 K191777 K213715
• Product Classification: System, x-ray, tomography, computed - Product Code JAK
• Product: Revolution CT, x-ray computed tomography, Model Numbers 5590000 and 5590000-6
• Code Information: UDI-DI: 00840682118552; Serial Numbers:REVVX2300007CN 443327CN2 REVVX1600034CN REVVX2400004CN REVVX2200047CN 441716CN8 00000440713CN6 REVVX1800043CN 441839CN8 REVVX1700067CN REVVX1800007CN REVVX1800105CN REVVX1800048CN REVVX1900123CN REVVX1800046CN REVVX2000005CN REVVX2200009CN REVVX1600013CN REVVX1700101CN REVVX2200025CN REVVX2100028CN REVVX1900069CN REVVX2100020CN REVVX2100014CN REVVX2100050CN REVVX1600052CN 438902CN9 REVVX1900107CN 438369CN1 REVVX1900018CN REVVX1700071CN REVVX1700082CN 442792CN8 REVVX2200007CN REVVX1700104CN REVVX2000056CN REVVX1900086CN REVVX2200039CN
• FEI Number: 2126677
• Recalling Firm/ Manufacturer: GE Medical Systems, LLC; 3000 N Grandview Blvd; Waukesha WI 53188-1615
• For Additional Information Contact: GE HealthCare Service; 800-437-1171
• Manufacturer Reason for Recall: GE HealthCare has become aware of a potential security vulnerability impacting AW Server deployed via Edison Health Link (EHL) based CT Smart Subscription used in conjunction with certain Revolution Apex, Revolution Ascend, and Revolution CT systems.
• FDA Determined Cause: Software design
• Action: An URGENT MEDICAL DEVICE CORRECTION notification letter dated 3/26/26 was sent to customers. Actions to be taken by Customer/User Pending corrections by GE HealthCare, you can continue to use your system by following security and cybersecurity best practices. Before the interim solution (see Product Correction section below) is applied, please follow the instructions below as identified in the respective CT system User Manuals: CAUTION: 3D or slab reconstructions provide additional supplemental information, complementing diagnosis that should be based on classical techniques. WARNING: Do not use 3D or slab views only to perform any measurements (distance, angle, region of interest, report cursor, area, volume, etc.). Always check measurement points position and refer to 2D baseline views (acquisition images or reformatted images of minimal thickness) to confirm measurements. Please ensure all potential users in your facility are made aware of this safety notification and the recommended actions. Please retain this document for your records. Please complete and return the attached acknowledgement form electronically via (https://gehealthcare-svc.my.site.com/publicForm/s/?formId=aGjUr000002jnD7) or print, fill out manually, scan and email to recall.23015@gehealthcare.com Product Correction GE HealthCare will correct all affected products at no cost to you in two steps. A GE HealthCare representative will contact you to arrange for an interim solution to deactivate AW Server authentication through the CT system on the EHL-based Smart Subscription, and later, to install a CT software update. Note: With the interim solution, all alternative authentication mechanisms (direct application launch from CT console user interface, login using users defined in AW Server user database, federation with hospital user directory through LDAP) will remain available. Contact Information If you have any questions or concerns regarding this notification, please contact GE HealthCare
• Quantity in Commerce: 38 units
• Distribution: Worldwide - US Nationwide distribution.
• Total Product Life Cycle: TPLC Device Report

¹ A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
² Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
³ The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.

• 510(K) Database: 510(K)s with Product Code = JAK