|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 05/29/2024 |
Software/
Informatics |
13-136 |
Complete |
ISO IEEE |
11073-20601 Third Edition 2022-12 |
Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol |
| 05/29/2024 |
Software/
Informatics |
13-137 |
Complete |
IEEE |
Std 11073-10101b-2023 |
Health informatics - Point-of-care medical device communication. Part 10101: Nomenclature |
| 05/29/2024 |
Software/
Informatics |
13-138 |
Complete |
IEEE |
Std 11073-10700-2022 |
Health Informatics - Device Interoperability Part 10700: Point-of-Care Medical Device Communication - Standard for Base Requirements for Participants in a Service-Oriented Device Connectivity (SDC) System |
| 05/29/2024 |
Software/
Informatics |
13-139 |
Complete |
IEEE |
Std 11073-10206-2022 |
Health informatics - Device interoperability - Part 10206: Personal health device communication - Abstract Content Information Model |
| 05/29/2024 |
Sterility |
14-598 |
Complete |
ISO |
14644-3 Second edition 2020-06 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
| 05/29/2024 |
Sterility |
14-599 |
Complete |
ISO |
14644-9 Second edition 2022-05 |
Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration |
| 05/29/2024 |
Sterility |
14-600 |
Complete |
ASTM |
F1929-23 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| 05/29/2024 |
Sterility |
14-601 |
Complete |
ISO |
17665 First edition 2024-03 |
Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 05/29/2024 |
Sterility |
14-602 |
Complete |
AAMI |
TIR12:2020/(R)2023 |
Designing, testing, and labeling medical devices intended for processing by health care facilities: A guide for device manufacturers |
| 05/29/2024 |
Sterility |
14-603 |
Complete |
AAMI |
TIR28:2016/(R)2020 |
Product adoption and process equivalence for ethylene oxide sterilization |
| 12/18/2023 |
Anesthesiology |
1-162 |
Complete |
ISO |
10651-4 Second edition 2023-03 |
Lung ventilators - Part 4: Particular requirements for user-powered resuscitators |
| 12/18/2023 |
Anesthesiology |
1-163 |
Complete |
ISO |
80601-2-72 Second edition 2023-06 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 12/18/2023 |
Anesthesiology |
1-164 |
Complete |
ISO |
5361 Fourth edition 2023-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 12/18/2023 |
Anesthesiology |
1-165 |
Complete |
ISO |
80601-2-13 Second edition 2022-04 |
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| 12/18/2023 |
Anesthesiology |
1-166 |
Complete |
ISO |
11195 Second edition 2018-01 |
Gas mixers for medical use - Stand-alone gas mixers |
| 12/18/2023 |
Biocompatibility |
2-302 |
Complete |
ASTM |
F981-23 |
Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
| 12/18/2023 |
Biocompatibility |
2-303 |
Partial |
ISO |
10993-17 Second edition 2023-09 |
Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents |
| 12/18/2023 |
Cardiovascular |
3-105 |
Partial |
IEC |
60601-2-25 Edition 2.0 2011-10 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
| ANSI AAMI IEC |
60601-2-25:2011/(R)2016 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
| 12/18/2023 |
Cardiovascular |
3-126 |
Partial |
IEC |
60601-2-27 Edition 3.0 2011-03 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment [Including: Corrigendum 1 (2012)] |
| ANSI AAMI IEC |
60601-2-27:2011(R)2016 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
| 12/18/2023 |
Cardiovascular |
3-189 |
Complete |
ASTM |
F2942-19 |
Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents |
| 12/18/2023 |
Cardiovascular |
3-190 |
Complete |
ISO |
PAS 7020 First edition 2023-05 |
Sizing parameters of surgical valve prostheses: Requirements regarding the application of ISO 5840-2 |
| 12/18/2023 |
Dental/
ENT |
4-309 |
Complete |
ISO |
6877 Third edition 2021-09 |
Dentistry - Endodontic obturating materials |
| ANSI ADA |
Standard No. 78-2021 |
Dentistry - Endodontic Obturating Materials |
| 12/18/2023 |
Dental/
ENT |
4-310 |
Complete |
ISO |
22112 Second edition 2017-08 |
Dentistry - Artificial teeth for dental prostheses |
| ANSI ADA |
Standard No. 15-2021 |
Artificial Teeth for Dental Prostheses |
| 12/18/2023 |
Dental/
ENT |
4-311 |
Complete |
ISO |
9917-2 Third edition 2017-09 |
Dentistry - Water-based cements - Part 2: Resin-modified cements |
| 12/18/2023 |
Dental/
ENT |
4-312 |
Complete |
ANSI ASA |
S3.35-2021 |
American National Standard Method for Measurement of Performance Characteristics of Hearing Aids Under Simulated Real-Ear Working Conditions |
| 12/18/2023 |
Dental/
ENT |
4-313 |
Complete |
ISO |
27020 Second edition 2019-06 |
Dentistry - Brackets and tubes for use in orthodontics |
| ANSI ADA |
Standard No.100-2020 |
Orthodontic Brackets and Tubes |
| 12/18/2023 |
Dental/
ENT |
4-314 |
Complete |
ISO |
7494-2 Third edition 2022-07 |
Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems |
| 12/18/2023 |
Dental/
ENT |
4-315 |
Complete |
ISO |
24234 Third edition 2021-08 |
Dentistry - Dental Amalgam |
| 12/18/2023 |
Dental/
ENT |
4-316 |
Complete |
ISO |
20127 Second edition 2020-08 |
Dentistry - Physical properties of powered toothbrushes |
| ANSI ADA |
Standard No.120-2022 |
Dentistry - Physical Properties of Powered Toothbrushes |
| 12/18/2023 |
Dental/
ENT |
4-317 |
Complete |
ISO |
8325 Third edition 2023-03 |
Dentistry - Test methods for rotary instruments |
| 12/18/2023 |
Dental/
ENT |
4-318 |
Complete |
ISO |
20749 Second edition 2023-06 |
Dentistry - Pre-capsulated dental amalgam |
| 12/18/2023 |
Dental/
ENT |
4-319 |
Partial |
ISO |
17730 Second edition 2020-09 |
Dentistry - Fluoride varnishes |
| ANSI ADA |
Standard No. 117-2022 |
Dentistry - Fluoride Varnishes |
| 12/18/2023 |
Dental/
ENT |
4-320 |
Complete |
ISO |
13402 First edition 1995-08-01 |
Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure |
| 12/18/2023 |
Dental/
ENT |
4-321 |
Complete |
ISO |
23450 First edition 2021-03 |
Dentistry - Intraoral camera |
| 12/18/2023 |
Dental/
ENT |
4-322 |
Complete |
ISO |
18675 First edition 2022-05 |
Dentistry - Machinable ceramic blanks |
| 12/18/2023 |
Dental/
ENT |
4-323 |
Complete |
ISO |
5139 First edition 2023-05 |
Dentistry - Polymer-based composite machinable blanks |
| 12/18/2023 |
Dental/
ENT |
4-324 |
Complete |
ISO |
TS 16506 First edition 2018-03 |
Dentistry - Polymer-based luting materials containing adhesive components |
| 12/18/2023 |
General Plastic Surgery/
General Hospital |
6-497 |
Partial |
ASTM |
D7866-23 |
Standard Specification for Radiation Attenuating Protective Gloves |
| 12/18/2023 |
InVitro Diagnostics |
7-318 |
Complete |
CLSI |
EP25 2nd Edition |
Evaluation of Stability of In Vitro Medical Laboratory Test Reagents |
| 12/18/2023 |
InVitro Diagnostics |
7-319 |
Complete |
CLSI |
M23 6th Edition |
Development of In Vitro Susceptibility Test Methods, Breakpoints, and Quality Control Parameters |
| 12/18/2023 |
InVitro Diagnostics |
7-320 |
Partial |
CLSI |
H62 1st Edition |
Validation of Assays Performed by Flow Cytometry |
| 12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/18/2023 |
Materials |
8-607 |
Complete |
ASTM |
F2082/F2082M-23 |
Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 12/18/2023 |
Materials |
8-609 |
Complete |
ASTM |
F2026-23 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 12/18/2023 |
Materials |
8-610 |
Complete |
ASTM |
F601-23 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 12/18/2023 |
Nanotechnology |
18-24 |
Partial |
ASTM |
E2524-22 |
Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles |
| 12/18/2023 |
ObGyn/
Gastroenterology/
Urology |
9-150 |
Complete |
ISO |
7439 Fourth edition 2023-04 |
Copper-bearing contraceptive intrauterine devices - Requirements and tests |
| 12/18/2023 |
Orthopedic |
11-402 |
Complete |
ASTM |
F1798-21 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
