MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX ALL-SILICONE FOLEY CATHETER

Model Number 165816

Device Problem Material Invagination (1336)

Patient Problem Patient Problem/Medical Problem (2688)

Event Type  malfunction  

Manufacturer Narrative

The reported event was inconclusive as no sample was returned for evaluation.A potential root cause for this failure mode could be due to ¿incorrect balloon design (balloon wall thickness excessive)¿.The device used for treatment, though it was unknown whether the device was related to the reported event or met specifications.The device was not returned for evaluation.The lot number was unknown, therefore the device history record could not be reviewed.The instructions for use were found adequate and state the following: "caution: federal (u.S.A.) law restricts this device to sale by or on the order of a physician.Sterile: unless package is opened or damaged.Warning: do not use ointments or lubricants having a petrolatum base.They will damage silicone and may cause balloon to burst.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Single use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip syringe.Do not use needle.Recommended inflation capacities 3cc balloon: use 5ml sterile water 5cc balloon: use 10ml sterile water 30cc balloon: use 35ml sterile water do not exceed recommended capacities.Warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Note: aggressive traction, particularly in the presence of suturing, is not recommended for 100% silicone foley catheters.To deflate catheter balloon: gently insert a syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use.".

Event Description

It was reported that a hard, rigid was formed when the balloon was deflated that caused trauma to the patient¿s urethra and pain while the catheter was removed.It was further reported that the staff was followed proper insertion techniques.No medical intervention was reported.

• Brand Name: BARDEX ALL-SILICONE FOLEY CATHETER
• Type of Device: SILICONE FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• Manufacturer (Section G): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• Manufacturer Contact: yonic anderson ; 8195 industrial blvd; covington, GA 30014 ; 7707846100
• MDR Report Key: 10259881
• MDR Text Key: 200612849
• Report Number: 1018233-2020-04480
• Device Sequence Number: 1
• Product Code: EZL
• UDI-Device Identifier: 00801741029752
• UDI-Public: (01)00801741029752
• Combination Product (y/n): N
• Reporter Country Code: CA
• PMA/PMN Number: K040504
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,other
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial
• Report Date: 07/10/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Other
• Device Model Number: 165816
• Device Catalogue Number: 165816
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 06/18/2020
• Initial Date FDA Received: 07/10/2020
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1