MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDIA ALL-SILICONE FOLEY CATHETER; SILICONE CATHETER

Model Number 806520

Device Problems Inadequate Instructions for Healthcare Professional (1319); Device Markings/Labelling Problem (2911)

Patient Problems No Patient Involvement (2645); No Known Impact Or Consequence To Patient (2692)

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.

Event Description

It was reported that foley was mislabeled as 10ml instead of 5ml.

Manufacturer Narrative

The reported event was inconclusive, as no sample returned for evaluation.A potential root cause for this failure mode could be due to "incorrect printing plate placement." it was unknown whether the device had met specifications.The product was not used for the treatment purposes.It was unknown whether the product had caused the reported failure.The device was not returned for evaluation.The lot number was unknown, therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: "caution: federal (u.S.A.) law restricts this device to sale by or on the order of a physician.Sterile: unless package is opened or damaged.Warning: do not use ointments or lubricants having a petrolatum base.They will damage silicone and may cause balloon to burst.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Single use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip syringe.Do not use needle.Recommended inflation capacities 3cc balloon: use 5ml sterile water 5cc balloon: use 10ml sterile water 30cc balloon: use 35ml sterile water do not exceed recommended capacities.Warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Note: aggressive traction, particularly in the presence of suturing, is not recommended for 100% silicone foley catheters.To deflate catheter balloon: gently insert a syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the device was not returned.

Event Description

It was reported that the foley was mislabeled as 10ml instead of 5ml.

• Brand Name: BARDIA ALL-SILICONE FOLEY CATHETER
• Type of Device: SILICONE CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 10380480
• MDR Text Key: 202967713
• Report Number: 1018233-2020-05057
• Device Sequence Number: 1
• Product Code: EZL
• UDI-Device Identifier: 00801741039195
• UDI-Public: (01)00801741039195
• Combination Product (y/n): N
• PMA/PMN Number: K040504
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: consumer,other
• Type of Report: Initial,Followup
• Report Date: 11/13/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Model Number: 806520
• Device Catalogue Number: 806520
• Was Device Available for Evaluation?: No
• Initial Date Manufacturer Received: 07/17/2020
• Initial Date FDA Received: 08/07/2020
• Supplement Dates Manufacturer Received: 10/21/2020
• Supplement Dates FDA Received: 11/13/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1