Model Number M0054665R0 |
Device Problems
Appropriate Term/Code Not Available (3191); Unexpected Shutdown (4019)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 08/07/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).The device has not been received for analysis.Upon receipt and completion of the failure analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.
|
|
Event Description
|
It was reported to boston scientific corporation that a spyglass ds controller was used during an endoscopic retrograde cholangiopancreatography (ercp) with electrohydraulic lithotripsy (ehl) procedure performed in the biliary on (b)(6) 2020.According to the complainant, during the procedure, the spyglass ds controller power shut down during the procedure.Reportedly, the power source was flickering in and out and the fan was making a loud noise.They were unable to gain the power back, and as a result the procedure was not completed due to this event.There were no patient complications reported as a result of this event.
|
|
Manufacturer Narrative
|
Block h6 (device codes): problem code 3191 is being used to capture the reportable event of aborted/cancelled procedure.Block h10: the returned spyglass ds controller was analyzed by enercon technologies, and a visual evaluation was performed.Fluid ingress was observed, and it was determined that a rebuild was required.Two y/c video outputs, 1 vga video output connector, and 32 conductor flex cable were replaced.Housing, top cover, cover gasket, front panel, keypad and rear bumper were replaced.The light engine was disassembled.The connector socket assembly was cleaned and the catheter interface pins were replaced.The power entry module was replaced.Miscellaneous hardware required for rebuild was replaced.Calibration and electrical safety tests were ran, and all tests were passed.The reported event was not confirmed.As per supplier report, some of the findings regarding the unit were connector outputs and housing damaged as well as a series of internal components which needed replacement due to fluid ingress found.Although the number of procedures/recycles of the unit are unknown, handling during use and reprocessing over time likely contributed to the event.Based on all gathered information, the most probable root cause of this complaint is cause traced to maintenance.A review of the manufacturing documentation for this device revealed that no anomalies or deviations related to the event occurred during manufacturing.A labeling review was performed and, from the information available, this device was used per the directions for use (dfu) / product label.
|
|
Event Description
|
It was reported to boston scientific corporation that a spyglass ds controller was used during an endoscopic retrograde cholangiopancreatography (ercp) with electrohydraulic lithotripsy (ehl) procedure performed in the biliary on august 07, 2020.According to the complainant, during the procedure, the spyglass ds controller power shut down during the procedure.Reportedly, the power source was flickering in and out and the fan was making a loud noise.They were unable to gain the power back, and as a result the procedure was not completed due to this event.There were no patient complications reported as a result of this event.
|
|
Search Alerts/Recalls
|
|