Model Number AX1000 |
Device Problems
Device Alarm System (1012); Application Program Problem: Dose Calculation Error (1189)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 09/01/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
This report has been identified as b.Braun medical inc.Internal report number (b)(4).The transfer set and the device logs have been received for evaluation and the investigation is ongoing at this time.A follow up will be submitted when the investigation results become available.
|
|
Event Description
|
As per reported by the user facility: it was noticed about halfway through the production day that micro line 12 (levocarnitine) was not dispensing fluid.Three (3) bags were scrapped that were possibly pump with an incomplete final container.There was no patient involvement.
|
|
Manufacturer Narrative
|
This report has been identified as b.Braun medical inc.Internal report number (b)(4).One (1) used transfer set was returned for evaluation.Visual examination of the set noted no defects.The set was was occlusion tested per specification with failing results.Line 12 was found to be occluded.A microscopic examination of line 12 indicates an occlusion/obstruction within the tubing joint which appears to be due to excessive solvent applied during assembly.A retained transfer set was visually inspected and no defects were noted.The retained transfer set was occlusion tested and vacuum leak tested per specification with passing results.Review of the discrepancy management system database performed for the reported lot number did not reveal any abnormalities or non-conformances of this nature.The log review confirmed an occurrence of an occlusion error, however the logs show consistent behavior of a source line clog on line 12.The investigation of the returned transfer set also concluded that line 12 did have an occlusion and the device operated as intended.Per the instructions for use (ifu), it is recommended that the user prime each source container until the source container line is full of solution and all bubbles are removed.This may take several primes.It is also recommended that the user use a hand to hold the source solution line and watch and feel for moving fluid through the line.The recommendations from the ifu were provided to the customer.If additional pertinent information becomes available a follow-up report will be filed.
|
|
Search Alerts/Recalls
|