|
Model Number 7210164 |
Device Problem
Incorrect Measurement (1383)
|
Patient Problems
No Consequences Or Impact To Patient (2199); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 09/24/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
Information is provided in the future, a supplemental report will be issued.
|
|
Event Description
|
According to the reporter, during hysteroscopy, the deficit had been reading incorrectly.They did a manual count since it was impossible that it was correct.There was no patient injury.
|
|
Event Description
|
According to the reporter, during hysteroscopy (&) polypectomy, the fluid management system unit with pressure was set at 80, saline solution was used as distention medium (fluid bag size 3000ml) only 1 bag in quantity.But when it was end of procedure it displayed a deficit 800ml.Manual measurement was done with fluid deficit only of 200ml and total inflow fluid used of 600ml with last remaining fluid from saline bag of 2400ml.It was noted that the fluid management system unit was reset to zero after priming; no fluid was left under the buttock of patient's drape nor fluid spill on the floor.There was no patient injury.
|
|
Manufacturer Narrative
|
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Search Alerts/Recalls
|
|
|