(b)(4).An ultraflex tracheobronchial covered stent was received for analysis; the delivery system was not returned.Visual examination of the returned device found the stent was received completely deployed.The loops of the stent were found bent.The outer diameter (od) of the stent and stent length were measured and was found to be within specification.No other issues were noted to the stent.The reported events of stent failure to deploy and shaft kinked were not confirmed; the stent was received completely deployed and the delivery system was not returned.There is no control of how the unit was handled or manipulated.Additionally, the loops of the stent were bent; however, there is not sufficient information about what could be the cause for this failure.Taking all available information, there is no indication of what the customer reported because the stent was returned completely deployed and the shaft was not returned.Therefore, a review and analysis of all available information indicated the most probable cause is no problem detected.A review of the manufacturing documentation for this device revealed that no anomalies or deviations related to the event occurred during manufacturing.
|
It was reported to boston scientific corporation that an ultraflex tracheobronchial covered distal release stent was to be implanted to treat a stenosis in the left main bronchus during a transfiberscope stent implantation procedure performed on (b)(6) 2020.According to the complainant, during the procedure, the delivery shaft was kinked and the black stent deployment suture could not be pulled.The stent was removed from the patient fully covered with stent deployment suture and another ultraflex tracheobronchial stent was implanted to complete the procedure.There were no patient complications reported as a result of this event.The patient's condition following the procedure was reported to be stable.Note: this event has been deemed an mdr reportable event based on investigation result which revealed the stent loops were bent.
|