Occupation: other non-healthcare professional: purchasing.Device has been returned and preliminary evaluation has been performed, however, our investigation is ongoing and device evaluation summary will be included in our follow up report once our investigation has been completed.This report includes information known at this time.A follow up report will be submitted should additional relevant information become available or after the device investigation is complete.
|
It was reported, during a mini percutaneous nephrolithotomy (pcnl) using a ultraxx nephrostomy balloon, the balloon was broken.Water was used to inflate the balloon to around 20atm, but the balloon broke after 20 seconds.Another new device was used to finished the procedure.No adverse effects have been reported due to the alleged malfunction.On 08oct2020, the manufacturer investigation of the returned device noted a tear in the balloon that would suggest the balloon ruptured during use.
|
Event summary it was reported, during a mini percutaneous nephrolithotomy (pcnl) using a ultraxx nephrostomy balloon, the balloon was broken.Water was used to inflate the balloon to around 20atm, but the balloon broke after 20 seconds.Another new device was used to finish the procedure.No adverse effects have been reported due to the alleged malfunction.Investigation - evaluation reviews of the complaint history, device history record, drawing, instructions for use, manufacturing instructions, specifications, and quality control procedures and a visual inspection and functional test of the device were conducted during the investigation.One open package containing an ultraxx nephrostomy balloon was returned for investigation.The balloon catheter and teflon sheath were in a used condition.Under magnification, a tear was visible in the balloon material.A document-based investigation evaluation was performed.One related nonconformance was recorded; the affected devices were scrapped and not replaced.One additional complaint was received from this product lot from the same user facility.All devices are leak tested during quality inspection.The device history record review provides objective evidence that the device was manufactured to specification.There is no evidence of nonconforming devices from the complaint lot in house or in the field.The device is provided with instructions for use which caution, ¿do not exceed the maximum rated burst pressure (listed on label) for this balloon device.¿ and, ¿do not pre-inflate the balloon.¿ the ifu also has instructions for proper balloon catheter introduction and proper use of the inflation device.Devices undergo quality inspections to visually examine each balloon for defects and leaks prior to distribution.Based on the available information, cook has concluded that a cause for the damage could not be determined.Cook will continue monitoring of similar complaints and have notified the appropriate personnel of this event.Per the quality engineering risk assessment, no further action is required.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|