THORATEC SWITZERLAND GMBH CENTRIMAG MOTOR, OUS; PUMP, BLOOD, CARDIOPULMONARY BYPASS, NON-ROLLER TYPE
|
Back to Search Results |
|
Model Number 201-10002 |
Device Problems
Mechanical Problem (1384); Insufficient Information (3190)
|
Patient Problems
No Consequences Or Impact To Patient (2199); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/07/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
No further information was provided.A supplemental report will be submitted when the manufacturer¿s investigation is completed.
|
|
Event Description
|
Related manufacturer reference number: 003306248-2020-05467.It was reported that about half an hour of regular operation on the centrimag, a loud noise was heard coming from the motor/pump without any alarms.Troubleshooting was performed by stopping the machine in order to reposition the pump but there was no resolution.The process was repeated without success.After the second attempt to reposition the pump, an "engine disconnected" alarm appeared on the console.The motor was exchanged, but the alarm persisted.The console was turned off and then on again to try to reset the system, but no resolution.The console was exchanged.The therapy was restarted.There was no consequences to the patient.No further information was provided.
|
|
Manufacturer Narrative
|
Manufacturer's investigation conclusion: the reported event of the centrimag motor making a loud atypical sound was not confirmed.The returned centrimag motor (serial number (b)(6) was functionally tested at the european distribution center and was found to perform as intended throughout all testing.Atypical events were unable to be reproduced.Preventive maintenance was performed, and the motor was returned to the customer site after passing all tests per procedure.The root cause of the reported event was unable to be conclusively determined through this analysis.The centrimag motor instructions for use (ifu) instructs users how to properly connect and operate the centrimag motor with a centrimag console.The labeling has an emergency/troubleshooting section for the primary console.The recommended practice, whenever there is a console or motor malfunction, is to replace the console and motor as a set.Remove the blood pump from the malfunctioning motor and console, and place the blood pump in the back-up motor and console to continue patient support (section 8 ¿emergency/troubleshooting¿).Review of the device history record for centrimag motor, serial number (b)(6), showed the device was manufactured in accordance with manufacturing and quality assurance specifications.No further information was provided.The manufacturer is closing the file on this event.
|
|
Search Alerts/Recalls
|
|
|