SMITH & NEPHEW, INC. GII MIS DCF ALIGN GDE; PROSTHESIS, KNEE, FEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, METAL
|
Back to Search Results |
|
Model Number 71441144 |
Device Problems
Crack (1135); Nonstandard Device (1420)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/01/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
(b)(4).
|
|
Event Description
|
It was reported that, during a tka procedure, using a gii mis dcf align gde, the tab on top was loose and didn't lock the distal cut block on , the surgeon had to hold distal guide on by hand, the procedure was completed successfully with no significant delay.No other complications were reported.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.
|
|
Manufacturer Narrative
|
The device, used in treatment, was returned for evaluation.The clinical/medical team concluded, per complaint details, the both bumpers broke during femoral impaction.Reportedly, all pieces were retrieved by hand and the procedure was completed within a 0-30 minute surgical extension using a backup device without patient injury or other complications.Patient impact beyond the 0-30 minute surgical delay and the modified surgical procedure with use of a backup device would not be anticipated as the procedure was reportedly completed without patient injury.No further medical assessment is warranted at this time.A visual inspection confirmed the journey fem impact bumper lt is cracked.The device shows significant signs of wear/usage.A review of the manufacturing records did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.At this time, we have no reason to suspect that the products failed to meet any product specifications at the time of manufacture.A complaint history review found related failures; this failure mode will be monitored for future complaints for any necessary corrective actions.A review of the risk management file revealed this failure mode was previously identified.At this time, we have no reason to suspect that the products failed to meet any product specifications at the time of manufacture.Damage from prolonged use, misuse or rough handling are likely probable causes of the reported event.We recommend that all reusable instruments be routinely inspected for wear and damage and replaced as necessary.This is a reusable instrument that can be exposed to numerous surgeries; damage from repeated use can occur.Based on this investigation, the need for corrective action is not indicated.Should additional information be received, the complaint will be reopened.No further investigation warranted for this complaint; however we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|
|
Search Alerts/Recalls
|
|
|