MAUDE Adverse Event Report: HUDSON CONCHA NEPTUNE; HUMIDIFIER, RESPIRATORY GAS, (

Model Number IPN913776

Device Problem Device Sensing Problem (2917)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/04/2021

Event Type  malfunction  

Manufacturer Narrative

(b)(4).Complaint verification testing could not be performed as no sample was returned for analysis.A verification of the reported failure mode was conducted and 8 devices were taken from current production (425-00 concha neptune lot # 73b210001n) at the manufacturing facility and were functionally tested.No issues were encountered during the functional testing.A device history record review was performed and no relevant findings were identified.Without the device to evaluate the complaint could not be confirmed and the probable cause could not be determined from the available information.Teleflex will continue to monitor and trend for reports of this nature.If the sample becomes available at a later date a follow up report will be submitted with investigation results.

Event Description

It was reported "the heater is not recognizing the temp.Probe".No patient involvement reported.

Manufacturer Narrative

(b)(4).The sample was returned for evaluation.A visual exam was performed and it was observed that the back right mounting bracket was cracked.No other issues were found.Functional testing was performed and the unit was connected to 110vac.The unit passed the initial power connect test and navigated through the power-on self-test (p.O.S.T.) with no issues.During the temperature display accuracy test the unit displayed the correct temperatures and properly alarmed in the high temperature scenario.The unit was prepared for the functional bench test where water, an adult breathing circuit (880-36kit), 2-3 lpm of air pressure, and a 382-10 concha smart water column was connected to the unit for a real time operational scenario.In addition to the named test parameters, the neptune operational values were set as follows: temperature was set at 37 c, mode was invasive, full rainout on the moisture scale.The neptune was turned on, values set.The unit successfully negotiated all pre-operational self-tests again and was functioning real time.The unit heated up to the set temperature and functioned without any interruption or functional anomalies.The unit recognized the temperature probes and accurately displayed the temperature during the functional bench test.No alarms were observed.Based on the investigation performed, the reported complaint could not be confirmed.Functional testing did not reveal any operational anomalies.

Event Description

It was reported "the heater is not recognizing the temp.Probe".No patient involvement reported.

• Brand Name: HUDSON CONCHA NEPTUNE
• Type of Device: HUMIDIFIER, RESPIRATORY GAS, (
• MDR Report Key: 11368348
• MDR Text Key: 233283673
• Report Number: 3003898360-2021-00147
• Device Sequence Number: 1
• Product Code: BTT
• UDI-Device Identifier: 14026704646811
• UDI-Public: 14026704646811
• Combination Product (y/n): N
• PMA/PMN Number: K131912
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,user f
• Type of Report: Initial,Followup
• Report Date: 02/04/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: No Information
• Device Model Number: IPN913776
• Device Catalogue Number: 425-00
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 02/16/2021
• Initial Date Manufacturer Received: 02/04/2021
• Initial Date FDA Received: 02/23/2021
• Supplement Dates Manufacturer Received: 03/25/2021
• Supplement Dates FDA Received: 03/26/2021
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Treatment: N/A.; N/A.