MAUDE Adverse Event Report: THORATEC SWITZERLAND GMBH RENTAL, CENTRIMAG MOTOR; PUMP, BLOOD, CARDIOPULMONARY BYPASS, NON-ROLLER TYPE

Model Number L102956

Device Problem Mechanical Problem (1384)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/01/2021

Event Type  malfunction  

Manufacturer Narrative

No further information was provided.A supplemental report will be submitted when the manufacturer's investigation is complete.

Event Description

It was reported that the centrimag motor had a jammed set screw and the motor was sent in for repair.There was no patient involvement.

Manufacturer Narrative

Manufacturer's investigation conclusion: the reported event of a damaged locking ring on the motor was confirmed.The centrimag motor (serial #: (b)(6)) was returned for analysis and upon visual inspection the reported event of damage to the locking ring was confirmed.The locking ring was replaced with a new one.The motor was functionally tested and operated as intended with no issues.A full functional checkout was performed, and the motor passed all tests.The motor was returned to the customer.The root cause for the reported event was unable to be conclusively determined through this analysis.The 2nd generation centrimag system operating manual (rev.11) section 4 entitled "warnings & precautions" warns "one additional 2nd generation centrimag primary console, motor and flow probe are required as backup system in the immediate vicinity of each patient whenever the centrimag or pedivas blood pump is used.The backup console must be connected to the backup motor and to the backup flow probe, have a battery charge sufficient for at least one hour of operation, be connected to ac power (except during transport) and be immediately available should the main console, motor or flow probe experience a malfunction." the 2nd generation centrimag system operating manual (rev.11) section 10 entitled "emergency and troubleshooting" states that "the recommended practice whenever there is a 2nd generation centrimag primary console or motor malfunction is to replace the console and motor as a set.Remove the blood pump from the malfunctioning motor and console and place the blood pump in the backup motor and console to continue patient support.Do not exchange individual motors or individual consoles during patient support." the device history records were reviewed for the centrimag motor (serial #: (b)(6)) and the motor was found to pass all manufacturing and qa specifications.No further information was provided.The manufacturer is closing the file on this event.

• Brand Name: RENTAL, CENTRIMAG MOTOR
• Type of Device: PUMP, BLOOD, CARDIOPULMONARY BYPASS, NON-ROLLER TYPE
• Manufacturer (Section D): THORATEC SWITZERLAND GMBH; technoparkstrasse 1; zurich CH-80 05; SZ CH-8005
• MDR Report Key: 11589663
• MDR Text Key: 244724639
• Report Number: 0002916596-2021-01210
• Device Sequence Number: 1
• Product Code: KFM
• UDI-Device Identifier: 07640135140078
• UDI-Public: 07640135140078
• Combination Product (y/n): N
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,health
• Type of Report: Initial,Followup
• Report Date: 05/26/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: L102956
• Device Catalogue Number: 102956
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/04/2021
• Was the Report Sent to FDA?: No
• Initial Date Manufacturer Received: 03/01/2021
• Initial Date FDA Received: 03/30/2021
• Supplement Dates Manufacturer Received: 05/25/2021
• Supplement Dates FDA Received: 05/26/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1