Event description: it was reported that the patient was implanted with a biolox head on (b)(6) 2021 and underwent revision on (b)(6) 2021 due to deep infection and sepsis.Review of received data: - due diligence: no further due diligence required as all required information to support the conclusion is available or was already requested.- x-rays: an x-ray review has been performed.No anomalies relevant to the reported event were identified.- surgical report: medical records were reviewed by a health care professional and identified that the patient began experiencing wound drainage on (b)(6) 2021, with a 1cm opening in the distal third of the incision draining serous fluid.The patient then underwent wound lavage and revision on (b)(6) 2021.Product evaluation: - no product was returned; therefore, visual and dimensional evaluation could not be performed.Review of product documentation: - device purpose: this device is intended for treatment.- product compatibility: the compatibility check was performed from www.Productcompatibility.Zimmer.Com and showed that the product combination was approved by zimmer biomet.- dhr review: review of the device history records identified no deviations or anomalies during manufacturing.- ncr(s): no ncr with a potential correlation to the reported event was found.- sterilization certificate: the eto/ gamma sterilization specification of the device certifies the suitability of sterilization.The irradiation certificate of the affected lot number has been reviewed and was found to be according to specifications.Conclusion: it was reported that the patient was implanted with a biolox head on (b)(6) 2021 and underwent revision on (b)(6) 2021 due to deep infection and sepsis.Sterilization certifications were reviewed and found to be conforming with no applicable deviations.Devices were verified to have gone through acceptable sterilization process following iso/aami/astm & eu published guidelines.There are multiple factors that may contribute to an infection that are outside the control of zimmer biomet, such as external factors, i.E.Hospital/surgical environment, provider related risk factors, and/or patient comorbidities/risk factors.As there are no indications of a product or process issues identified affecting implant safety or effectiveness, therefore implanted products are not identified as the source or contributing to the reported infection.Based on the investigation the reported event can be confirmed.The quality records show that all specified characteristics have met the specifications valid at the time of production.Therefore, the investigation did not identify a nonconformance or a complaint out of box (coob).The need for corrective measures is not indicated and zimmer switzerland manufacturing gmbh considers this case as closed.Zimmer biomet¿s reference number of this file is (b)(4).
|