MAUDE Adverse Event Report: THORATEC SWITZERLAND GMBH CENTRIMAG MOTOR, US; PUMP, BLOOD, CARDIOPULMONARY BYPASS, NON-ROLLER TYPE

Model Number 102956

Device Problem Mechanical Problem (1384)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 04/22/2021

Event Type  malfunction  

Manufacturer Narrative

No further information was provided.A supplemental report will be submitted when the manufacturer¿s investigation is completed.

Event Description

Was reported that the site had a centrimag motor with a bad set screw.It was requested to be repaired.

Manufacturer Narrative

Manufacturer's investigation conclusion: the reported event of the centrimag motor¿s locking screw being damaged was confirmed, as the screw was unable to rotate upon arrival.The returned centrimag motor (serial number (b)(6) was received at the service depot.The motor¿s locking mechanism was replaced with a new component.The motor was then functionally tested and was found to perform as intended.A full functional checkout was performed, and the serviced and repaired motor was returned to the customer site after passing all tests per procedure.The root cause of the damage to the locking screw was unable to be conclusively determined through this analysis.Review of the device history record for centrimag motor, serial number (b)(6), showed the device was manufactured in accordance with manufacturing and quality assurance specifications.The 2nd generation centrimag system operating manual provides information regarding emergencies/troubleshooting in section 10.The recommended practice whenever there is a console or motor malfunction is to replace the console and motor as a set.Remove the blood pump from the malfunctioning motor and console, and place the blood pump in the back-up motor and console.Switch all components (console, motor, flow probe and cables) simultaneously to continue patient support, and then perform troubleshooting on the non-functioning system, when it is no longer being used for patient support.Centrimag motor instructions for use (ifu) instructs the user to inspect the centrimag motor, cable, console connector, and locking mechanism for any damage prior to use.If any component is damaged, do not use the centrimag motor.This document states that if the unit fails to operate according to the motor specifications or a console diagnostic error indicates a centrimag motor malfunction, it should be returned.Additionally, this document instructs the user to always have a spare centrimag motor and back-up equipment available.No further information was provided.The manufacturer is closing the file on this event.

• Brand Name: CENTRIMAG MOTOR, US
• Type of Device: PUMP, BLOOD, CARDIOPULMONARY BYPASS, NON-ROLLER TYPE
• Manufacturer (Section D): THORATEC SWITZERLAND GMBH; technoparkstrasse 1; zurich CH-80 05; SZ CH-8005
• MDR Report Key: 11821557
• MDR Text Key: 251243115
• Report Number: 3003306248-2021-01119
• Device Sequence Number: 1
• Product Code: KFM
• UDI-Device Identifier: 07640135140078
• UDI-Public: 07640135140078
• Combination Product (y/n): N
• PMA/PMN Number: K020271
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,health
• Type of Report: Initial,Followup
• Report Date: 08/23/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Model Number: 102956
• Device Catalogue Number: 102956
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 06/16/2021
• Was the Report Sent to FDA?: No
• Initial Date Manufacturer Received: 04/22/2021
• Initial Date FDA Received: 05/13/2021
• Supplement Dates Manufacturer Received: 08/17/2021
• Supplement Dates FDA Received: 08/23/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1