STRYKER ORTHOPAEDICS-MAHWAH CUP IMPACTOR BOLT; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/POLYMER, POROUS UNCEMENTED
|
Back to Search Results |
|
Model Number 1440-2011 |
Device Problems
Difficult to Remove (1528); Component Misassembled (4004)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 05/17/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
An event regarding disassembly issue involving a da instrument bolt was reported.The event was not confirmed.Method & results product evaluation and results: material analysis, visual, functional and dimensional inspections could not be performed as the device was not returned.Clinician review: no medical records were received for review with a clinical consultant.Product history review: could not be performed as the device lot details were not provided.Complaint history review: could not be performed as the device lot details were not provided.Conclusions: the exact cause of the event could not be determined because insufficient information was provided.Further information such as return of the device, pathology reports, pre- and post-operative x-rays and the primary operative report as well as patient history and follow-up notes are needed to complete the investigation for determining root cause.No further investigation for this event is possible at this time.If devices and / or additional information become available to indicate further evaluation is warranted, this record will be reopened.
|
|
Event Description
|
Primary procedure, left hip.It was reported that the offset cup inserter became stuck in the cup.The construct was removed and another shell implanted.Surgery was completed successfully with a delay of approximately 5-10 minutes.Rep provided the usage sheet showing the wasted shell, and confirmed that no further information will be released by the hospital or surgeon.Update per sales rep on june 1, 2021: the product in question is the bolt 1440-2011.
|
|
Manufacturer Narrative
|
Reported event: an event regarding disassembly issue involving a da instrument bolt was reported.The event was not confirmed.Method & results: -product evaluation and results: visual inspection: visual inspection of the returned device ( the two devices were returned assembled) indicates nothing remarkable to report dimensional inspection: not performed as the dimensional aspects are not in question.Functional inspection: the two devices were returned assembled.The devices were unable to be disassembled by hand; however were disassembled with tools.Functional testing was performed with the bolt and shell after disassembly and were able to assemble and disassemble without issue.Material analysis: not performed as this event does not relate to material integrity.-clinician review: no medical records were received for review with a clinical consultant.-device history review: all devices were manufactured and accepted into final stock with no relevant reported discrepancies. -complaint history review: there have been no other similar events for the reported lot. conclusions: functional testing was performed with the bolt and shell after disassembly and were able to assemble and disassemble without issue.No further investigation for this event is possible at this time.If additional information become available to indicate further evaluation is warranted, this record will be reopened.
|
|
Event Description
|
Primary procedure, left hip.It was reported that the offset cup inserter became stuck in the cup.The construct was removed and another shell implanted.Surgery was completed successfully with a delay of approximately 5-10 minutes.Rep provided the usage sheet showing the wasted shell, and confirmed that no further information will be released by the hospital or surgeon.Update per sales rep on june 1, 2021: the product in question is the bolt (b)(4).
|
|
Search Alerts/Recalls
|
|
|