• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BOSTON SCIENTIFIC CORPORATION ROTAPRO; CATHETER, CORONARY, ATHERECTOMY

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BOSTON SCIENTIFIC CORPORATION ROTAPRO; CATHETER, CORONARY, ATHERECTOMY Back to Search Results
Model Number 3256
Device Problem Mechanical Problem (1384)
Patient Problems Arrhythmia (1721); Bradycardia (1751); Cardiac Arrest (1762); Chest Pain (1776); Low Blood Pressure/ Hypotension (1914); Perforation of Vessels (2135); Pseudoaneurysm (2605); Foreign Body In Patient (2687); Insufficient Information (4580)
Event Date 07/01/2021
Event Type  Death  
Event Description
It was reported that a catheter rotation would not stop resulting in the patient being sent to the intensive care unit.The target lesion was located in the circumflex artery.An opticross imaging catheter was advanced to the circumflex to evaluate the blockage.The catheter tip then became stuck in the blockage.The opticross was attempted to be withdrawn.Force was applied to remove the catheter and the distal tip detached inside the blockage within the circumflex.Retrieval attempts were made to retrieve the dislodged tip.A 1.5mm rotapro burr catheter was used to ablate a path to reach the detached tip.While atherectomy was being performed in the artery the system could not stop rotating.The power was turned off on the rotapro console.Subsequently, the patient coded.The patient lost their left anterior descending artery and a pseudoaneurysm formed in the proximal area of the circumflex artery.A left ventricular assist device was placed inside the patient and the left anterior descending artery was stented without issue.The patient stabilized and was sent to the intensive care unit.
 
Event Description
It was reported that a catheter rotation would not stop resulting in the patient being sent to the intensive care unit.The target lesion was located in the circumflex artery.An opticross imaging catheter was advanced to the circumflex to evaluate the blockage.The catheter tip then became stuck in the blockage.The opticross was attempted to be withdrawn.Force was applied to remove the catheter and the distal tip detached inside the blockage within the circumflex.Retrieval attempts were made to retrieve the dislodged tip.A 1.5mm rotapro burr catheter was used to ablate a path to reach the detached tip.While atherectomy was being performed in the artery the system could not stop rotating.The power was turned off on the rotapro console.Subsequently, the patient coded.The patient lost their left anterior descending artery and a pseudoaneurysm formed in the proximal area of the circumflex artery.A left ventricular assist device was placed inside the patient and the left anterior descending artery was stented without issue.The patient stabilized and was sent to the intensive care unit.It was further reported that the patient died.
 
Event Description
Medwatch mw5102557.It was reported that a catheter rotation would not stop resulting in the patient being sent to the intensive care unit.The target lesion was located in the circumflex artery.An opticross imaging catheter was advanced to the circumflex to evaluate the blockage.The catheter tip then became stuck in the blockage.The opticross was attempted to be withdrawn.Force was applied to remove the catheter and the distal tip detached inside the blockage within the circumflex.Retrieval attempts were made to retrieve the dislodged tip.A 1.5mm rotapro burr catheter was used to ablate a path to reach the detached tip.While atherectomy was being performed in the artery the system could not stop rotating.The power was turned off on the rotapro console.Subsequently, the patient coded.The patient lost their left anterior descending artery and a pseudoaneurysm formed in the proximal area of the circumflex artery.A left ventricular assist device was placed inside the patient and the left anterior descending artery was stented without issue.The patient stabilized and was sent to the intensive care unit.It was further reported that the patient died.It was additionally reported that the lesion was 90% stenosed and located in the severely calcified and tortuous circumflex artery.After the second pass, the console would not turn off.The power cables were physically unplugged from the console to power off the console.The patient experienced chest pain, a drop in heartrate and blood pressure.Cardiopulmonary resuscitation (cpr) was performed and anesthesia was administered for intubation.After approximately 30 minutes of cpr, the patient experienced arrhythmia and was transported to the intensive care unit (icu).It was noted that the black circular connector on the console was loose, as a result the console would shut off by itself.
 
Manufacturer Narrative
Age at time of event: 18 years or older.
 
Manufacturer Narrative
Age at time of event: 18 years or older.
 
Event Description
Medwatch mw5102557.It was reported that a catheter rotation would not stop resulting in the patient being sent to the intensive care unit.The target lesion was located in the circumflex artery.An opticross imaging catheter was advanced to the circumflex to evaluate the blockage.The catheter tip then became stuck in the blockage.The opticross was attempted to be withdrawn.Force was applied to remove the catheter and the distal tip detached inside the blockage within the circumflex.Retrieval attempts were made to retrieve the dislodged tip.A 1.5mm rotapro burr catheter was used to ablate a path to reach the detached tip.While atherectomy was being performed in the artery the system could not stop rotating.The power was turned off on the rotapro console.Subsequently, the patient coded.The patient lost their left anterior descending artery and a pseudoaneurysm formed in the proximal area of the circumflex artery.A left ventricular assist device was placed inside the patient and the left anterior descending artery was stented without issue.The patient stabilized and was sent to the intensive care unit.It was further reported that the patient died.It was additionally reported that the lesion was 90% stenosed and located in the severely calcified and tortuous circumflex artery.After the second pass, the console would not turn off.The power cables were physically unplugged from the console to power off the console.The patient experienced chest pain, a drop in heartrate and blood pressure.Cardiopulmonary resuscitation (cpr) was performed and anesthesia was administered for intubation.After approximately 30 minutes of cpr, the patient experienced arrhythmia and was transported to the intensive care unit (icu).It was noted that the black circular connector on the console was loose, as a result the console would shut off by itself.It was additionally reported that the black circular power connector was loose prior to the procedure.The connector was loose due to overuse.The power button was fully depressed several times in an attempt to get the system to power off before unplugging the cables.The gas supply valve was fully closed.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ROTAPRO
Type of Device
CATHETER, CORONARY, ATHERECTOMY
Manufacturer (Section D)
BOSTON SCIENTIFIC CORPORATION
two scimed place
maple grove MN 55311
MDR Report Key12170421
MDR Text Key261656455
Report Number2134265-2021-09021
Device Sequence Number1
Product Code MCX
UDI-Device Identifier08714729975076
UDI-Public08714729975076
Combination Product (y/n)N
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Type of Report Initial,Followup,Followup,Followup
Report Date 09/02/2021
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number3256
Device Catalogue Number3256
Device Lot NumberRP001202
Was Device Available for Evaluation? No
Initial Date Manufacturer Received 07/01/2021
Initial Date FDA Received07/14/2021
Supplement Dates Manufacturer Received07/14/2021
07/26/2021
08/11/2021
Supplement Dates FDA Received07/23/2021
08/17/2021
09/02/2021
Patient Sequence Number1
Patient Outcome(s) Death; Other; Required Intervention;
-
-