|
Model Number F5QF005CT |
Device Problems
Material Twisted/Bent (2981); Appropriate Term/Code Not Available (3191)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/01/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Manufacturer's reference number: (b)(4).
|
|
Event Description
|
It was reported that a patient underwent an ablation procedure with a webster catheter and a knotted catheter issue occurred.Right ventricle catheter was knotted in the vessel.It was too soft although it was a new catheter.Physician changed the catheter.The new one was better.No patient consequence was reported.There was difficulty experienced while maneuvering the catheter.There was no detachment of any component.The loop/tip became unknotted.The issue did not result in exposure of any internal catheter components or sharp edges.The knotted catheter issue was assessed as a mdr reportable malfunction.
|
|
Manufacturer Narrative
|
If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).During an internal review on 26-aug-2021, noted a correction to the initial as the physician information was not included.Therefore, added this information to e.Initial reporter.
|
|
Manufacturer Narrative
|
The bwi product analysis lab received the device for evaluation on 29-aug-2021.The analysis has begun but is not completed at this time.When the investigational analysis has been completed, a supplemental 3500a report will be submitted.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).
|
|
Manufacturer Narrative
|
It was reported that a patient underwent an ablation procedure with a webster catheter.Right ventricle catheter was knotted in the vessel.It was too soft although it was a new catheter.Physician changed the catheter.The new one was better.No patient consequence was reported.There was difficulty experienced while maneuvering the catheter.There was no detachment of any component.The loop/tip became unknotted.The issue did not result in exposure of any internal catheter components or sharp edges.Device evaluation was completed on 01-oct-2021.The product was returned to biosense webster for evaluation.Bwi conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that a bent in the shaft was observed on the webster catheter.As part of bwi¿s quality process, all devices are manufactured, inspected, and released to approved specifications.A manufacturing record evaluation was performed for the finished device 30589790m number, and no internal action related to the complaint was found during the review.It should be noted that product failure is multifactorial.The instructions for use contain the following the sterile packaging and catheter should be inspected prior to use.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4) during an internal review on 30-sep-2021, added the ¿h6.Medical device problem code" of ¿appropriate term/code not available (a27)¿ to represent that it was customer preference related for the issue that it was reported that it was too soft.
|
|
Manufacturer Narrative
|
If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4) initially the device evaluation was completed on (b)(6)-2021 and was submitted under 3500a follow-up #3.During an internal review on (b)(6)-2021, a correction to the device evaluation was noted.Below is the correction device evaluation: the product was returned to biosense webster for evaluation.Bwi conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that a bent in the shaft was observed on the webster catheter.A manufacturing record evaluation was performed for the finished device 30589790m number, and no internal action related to the complaint was found during the review.As part of bwi¿s quality process, all devices are manufactured, inspected, and released to approved specifications.The issue is not related to the manufacturing process, as all devices are manufactured, inspected, and released to approved specifications.The instructions for use contain the following: ¿the sterile packaging and catheter should be inspected prior to use¿.The root cause of the product failure can be multifactorial.Based upon the event description, the device got knotted in the vessel.It is likely that the bent occurred during the manipulation to unknot the catheter and to remove it from the vessel.
|
|
Search Alerts/Recalls
|
|
|