|
Model Number M0062101180 |
Device Problem
Burst Container or Vessel (1074)
|
Patient Problems
Fever (1858); Perforation (2001)
|
Event Date 08/18/2021 |
Event Type
Injury
|
Manufacturer Narrative
|
(b)(4).The device has not been received for analysis.Upon receipt and completion of the failure analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.
|
|
Event Description
|
It was reported to boston scientific corporation that a nephromax balloon kit was used in the kidney during a percutaneous nephrolithotomy (pcnl) procedure performed on (b)(6) 2021.During the procedure, the balloon was inflated however; it was noticed that the balloon burst at 18 atm.Reportedly, the balloon was removed and a perforation was noted on the patients renal pelvis.The perforation was confirmed with a ct scan and no further action was taken to treat the perforation as it is believed to heal on its own; however, the hospital stay was extended to monitor the patient status.The procedure was completed with a retrograde stent.It was reported that after the procedure, the patient had a fever but it eventually subsided.The patient was then discharged after a few days.
|
|
Event Description
|
It was reported to boston scientific corporation that a nephromax balloon kit was used in the kidney during a percutaneous nephrolithotomy (pcnl) procedure performed on (b)(6) 2021.During the procedure, the balloon was inflated however; it was noticed that the balloon burst at 18 atm.Reportedly, the balloon was removed and a perforation was noted on the patients renal pelvis.The perforation was confirmed with a ct scan and no further action was taken to treat the perforation as it is believed to heal on its own; however, the hospital stay was extended to monitor the patient status.The procedure was completed with a retrograde stent.It was reported that after the procedure, the patient had a fever but it eventually subsided.The patient was then discharged after a few days.
|
|
Manufacturer Narrative
|
Block h6: patient code e2114 captures the reportable event of perforation.Impact code f08 captures the reportable event of prolonged hospitalization.Device problem code a0402 captures the reportable event of balloon burst.Block h10: investigation result a visual examination of the returned complaint device found that the balloon was not folded which indicates that the device was subjected to positive pressure.A microscopic examination was performed and it was noticed that the balloon was torn longitudinally from the distal markerband extending across the balloon material, thereby confirming the reported event of balloon burst.No problems were observed on the balloon material, markerbands, shaft and tip of the device.Based on the available information, there is no evidence of a manufacturing issue or design issue which could have caused the complaint and there is no evidence that the device failed to meet nephromax ng specification prior to shipping.Although the device was not inflated next to a stone, it is possible that the balloon had an interaction with a stone when the device was being positioned which caused weakness in the balloon material, resulting to balloon bursting and balloon torn when positive pressure was applied.Regarding the perforation of the renal pelvis with symptom of fever reported in the complaint, this is known potential adverse event related with the use of the device and are noted within the ifu.Therefore, the most probable root cause is adverse event related to procedure.A review of the device history record (dhr) was performed and confirmed that this device met all material, assembly and performance specifications.A labeling review was performed and from the information available, this device was used per the instructions for use (ifu)/product label.
|
|
Search Alerts/Recalls
|
|
|