|
Model Number AC3200 |
Device Problems
Leak/Splash (1354); Connection Problem (2900)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 09/03/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
If information is provided in the future, a supplemental report will be issued.
|
|
Event Description
|
An attempt was made to use an everest inflation device.It was reported that the pressure pump interface was not tight enough and leaked air.The device was connected to a balloon inside the patient when it was inflated 3 times with 6 atm-8 atm per 10 seconds.The high-pressure pump was used to give pressure and it was found that the interface leaked air.It was suggested that the screw thread process problem at the interface of the high-pressure pump led to insufficient sealing and pressure leakage.The pressure pump was replaced and the procedure was completed.No patient injury was reported.
|
|
Manufacturer Narrative
|
Additional information: the leak occurred when the balloon was pressurized.A stopcock was not connected between the everest device and the balloon.Correction: a non-medtronic guidewire was delivered to the distal end of the anterior descending artery through a catheter.Then a 2.0 x 15 mm medtronic sprinter balloon was delivered to the proximal segment of the anterior descending artery through the guidewire.The balloon was inflated 3 times with 6 atm - 8 atm's per 10 seconds from the far to the nearest.The air pump leak resulted in intraoperative risks and prolonged the operation time.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
Additional information: annex d code added correction: manufacturer details updated (d3) pma / 510(k) # updated medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Search Alerts/Recalls
|
|
|