BOSTON SCIENTIFIC CORPORATION AUTOTOME RX 44; UNIT, ELECTROSURGICAL, ENDOSCOPIC (WITH OR WITHOUT ACCESSORIES)
|
Back to Search Results |
|
Model Number M00545170 |
Device Problems
Failure to Fold (1255); Positioning Problem (3009)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/21/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
This event was reported by the distributor.The physician is: (b)(6).Initial reporter address: (b)(6).(b)(4).The device has not been received for analysis.Upon receipt and completion of the problem analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.
|
|
Event Description
|
It was reported to boston scientific corporation that an autotome rx 44 was used in the common bile duct during an endoscopic retrograde cholangiopancreatography (ercp) procedure performed on (b)(6) 2021.During the procedure, it was noticed that the orientation of the cutting wire was incorrect and the cutting wire did not bow completely.It was reported that there was no any visible damage to device prior to putting it through the scope or after the problem occurred.The procedure was completed with another of the same device.There were no patient complications reported as a result of this event.The patient's condition at the conclusion of the procedure was reported to be stable.
|
|
Manufacturer Narrative
|
Section e: this event was reported by the distributor.The physician is: (b)(6).Block e1 (initial reporter address 2): (b)(6).Block h6 (device codes): medical device problem code a1502 captures the reportable event of incorrect cutting wire orientation.Block h10: the returned autotome rx 44 was analyzed, and a visual evaluation noted that the working length was twisted, consistent with the finding when the device was observed under magnification.A functional evaluation was performed by bowing the device both outside and inside the scope, and the device bowed and unbowed as intended.Additionally, the device was put inside the scope and when the distal tip of the device extended past the elevator of the duodenoscope, it was noticed that the catheter was not correctly oriented due to the twist on the working length.No other problems with the device were noted.The reported complaint of incorrect cutting wire orientation was confirmed.Upon analysis, it was found that the working length was twisted.This condition could have been caused after multiple attempts to rotate the device during procedure or during introduction of the device into the scope.Based on all gathered information, the most probable root cause of this complaint is adverse event related to procedure.A review of the manufacturing documentation for this device revealed that no anomalies or deviations related to the event occurred during manufacturing.
|
|
Event Description
|
It was reported to boston scientific corporation that an autotome rx 44 was used in the common bile duct during an endoscopic retrograde cholangiopancreatography (ercp) procedure performed on (b)(6) 2021.During the procedure, it was noticed that the orientation of the cutting wire was incorrect and the cutting wire did not bow completely.It was reported that there was no any visible damage to device prior to putting it through the scope or after the problem occurred.The procedure was completed with another of the same device.There were no patient complications reported as a result of this event.The patient's condition at the conclusion of the procedure was reported to be stable.
|
|
Search Alerts/Recalls
|
|
|