It was reported that, during set up for treatment, an opsite flexifix 5cmx10m ctn 1 was impossible to unroll because there was some adhesive on the backside of the release paper.When the customer tried to unroll to use, the release paper was torn up.Treatment was performed, without any delay, with a back-up device instead.Patient was not injured as consequence of this problem.
|
H10: it was reported that during set up it was impossible to unroll the opsite flexifix because there was some adhesive ion the back of the release paper and when the customer tried to unroll to use, the release paper was torn up.The device was used for treatment and was not returned for analysis, however a comprehensive photograph was provided which established a relationship between the event and the device.The batch records were reviewed and it could be confirmed that the products had progressed through a satisfactory release process which involved testing the product against the requirements of the finished product specification.There was also no issue identified during the manufacturing process that could have caused or contributed to the complaint problem.A complaint history review revealed a small number of similar instances in the last three years.The risk files, mitigate the reported issues with no updates required.Probable root cause is an environmental factor such as temperature, due to the device not being stored in the correct conditions.A rise in temperature can affect the adhesive nature of the dressing which can cause issues of this type.The users of the reported product are advised to consult the ifu, to prevent future occurrences of the reported issue.This guide provides comprehensive instructions of the operation, use and limitations of the device, including the correct conditions in which the device must be stored.This investigation is now complete, with no corrective actions required.No further actions by smith and nephew are deemed necessary at this stage.However, we will continue to monitor for any adverse trends relating to this product range.Smith and nephew acknowledge customer concern and are continually investigating ways to develop and improve our products internal complaint reference number: (b)(4).
|