Model Number 1003327 |
Device Problems
Leak/Splash (1354); Loose or Intermittent Connection (1371); Mechanical Problem (1384)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/23/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Date of event estimated.The device is expected to be returned for investigation.It has not yet been received.A follow-up report will be submitted with all additional relevant information.
|
|
Event Description
|
It was reported as a general comment that the indeflator from the priority pak do not connect properly, or have an air leak of some kind.When the indeflator is attached to the balloon and negative is pulled, it fills completely full of air and loses it's suction.There have also been instances of difficulty locking/unlocking.Another indeflator was used to successfully complete the procedure.No additional information was provided.
|
|
Manufacturer Narrative
|
Date of event estimated.The device is expected to be returned for investigation.It has not yet been received.A follow-up report will be submitted with all additional relevant information.
|
|
Event Description
|
It was reported as a general comment that the indeflator from the priority pak do not connect properly, or have an air leak of some kind.When the indeflator is attached to the balloon and negative is pulled, it fills completely full of air and loses it's suction.There have also been instances of difficulty locking/unlocking.Another indeflator was used to successfully complete the procedure.No additional information was provided.
|
|
Manufacturer Narrative
|
The device was not returned for analysis however this complaint appears to be related to a manufacturing issue associated with leak / loose or intermittent connection issues.A review of the lot history record and similar incident review of the reported lot could not be conducted because the lot number was not provided.The investigation determined the reported difficulties appear to be a potential product quality issue.A nonconforming material record/exception was generated to investigate the reported issue in accordance with internal operating procedures.The issue is being addressed per internal operating procedures.Abbott vascular will continue to trend the performance of these devices.D9, h3: device status changed from returning to discarded.
|
|
Manufacturer Narrative
|
The device was not returned for analysis however this complaint appears to be related to a manufacturing issue associated with leak / loose or intermittent connection issues.A review of the lot history record and similar incident review of the reported lot could not be conducted because the lot number was not provided.The investigation determined the reported difficulties appear to be a potential product quality issue.On feb 25th, 2022 abbott vascular decided to initiate a voluntary field action.The product associated with this complaint is potentially from the impacted population as the lot number is unknown.Abbott vascular submitted medwatch # 2024168-2022-01831 on march 4, 2022 with notification of the voluntary recall in h7, (remedial action initiated).Corrective action has been initiated per site operating procedures.Field safety corrective action is required for specific lots of 20/30 and plus 30 indeflators and associated priority packs: 20/30 priority pack with copliot, 20/30 priority pack, priority pack 20/30 w/115 rhv, ppak 20/30 with rhv, plus 30, ppakplus30, ppakplus30 w/115 rhv.This action is being taken due to an increase in the complaint trend for reported leak/splash and loose or intermittent connection.20/30 indeflators are at an increased risk of leaking due to a gap in the hose snap fitting.Stopcocks are at an increased risk of leaking due to a higher tendency for loose connections when not connected properly.Out of an abundance of caution, complaints with the lot number listed as ¿unknown¿ and which are included within the bracketed timeframe for the same reported issues, are being included in the scope.
|
|
Search Alerts/Recalls
|