MAUDE Adverse Event Report: DEPUY MITEK LLC US MICRO TORNADO HP W HANDCONTROL; LINE-POWERED ARTHROSCOPIC SHAVER SYSTEM

Model Number 283512

Device Problems Overheating of Device (1437); Infusion or Flow Problem (2964); Device Contaminated During Manufacture or Shipping (2969)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/10/2022

Event Type  malfunction  

Manufacturer Narrative

Additional narrative: udi: (b)(4).To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.

Event Description

It was reported by the affiliate in that belgium that during a shoulder repair procedure on (b)(6) 2022, it was observed that the micro tornado hp w handcontrol device became hot and blocked.According to the report, after becoming hot, there were black debris came out of the device.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: h4: the device manufacture date was reported as unknown on the initial report; and has been updated accordingly.Investigation summary: the complaint device is not being returned, therefore unavailable for a physical evaluation.Should the device ever be received back in the future, this complaint file will be reopened at that time and an evaluation will be performed and documented.A manufacturing record evaluation was performed for the finished device serial number (b)(6), and no non-conformance was identified.As part of depuy mitek¿s quality process all devices are manufactured, inspected, and released to approved specifications.With the information provided, and without the complaint device to evaluate, we cannot determine a root cause for the reported failure.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post market surveillance.At this point in time, no corrective action is required, and no further action is warranted.Depuy mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-upmedwatch will be filed as appropriate.Investigation summary: the complaint device was received at the service center and evaluated.During the service evaluation the following defects were identified: functional : will not run - motor damaged.Functional : electrical short.Visual : corrosion/rusting/pitting.Per service reports, this complaint can be confirmed.The repair of the device was however declined, and it is being placed into long term hold.As part of depuy mitek¿s quality process all devices are manufactured, inspected, and released to approved specifications.The faulty parts was identified as the root cause for the device failure during the service evaluation.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post market surveillance.At this point in time, no corrective action is required, and no further action is warranted.Depuy mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

• Brand Name: MICRO TORNADO HP W HANDCONTROL
• Type of Device: LINE-POWERED ARTHROSCOPIC SHAVER SYSTEM
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer Contact: kara ditty-bovard ; 325 paramount drive; raynham, MA 02767 ; 6103142063
• MDR Report Key: 13637234
• MDR Text Key: 292748744
• Report Number: 1221934-2022-00664
• Device Sequence Number: 1
• Product Code: HRX
• UDI-Device Identifier: 10886705016938
• UDI-Public: 10886705016938
• Combination Product (y/n): N
• Reporter Country Code: BE
• PMA/PMN Number: K954465
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 283512
• Device Catalogue Number: 283512
• Device Lot Number: 1323M3951
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Initial Date Manufacturer Received: 02/10/2022
• Initial Date FDA Received: 03/01/2022
• Supplement Dates Manufacturer Received: 06/27/2022; 08/25/2022
• Supplement Dates FDA Received: 06/27/2022; 08/25/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 12/01/2013
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Removal/Correction Number: N/A
• Patient Sequence Number: 1