Model Number N/A |
Device Problems
Inadequacy of Device Shape and/or Size (1583); Patient-Device Incompatibility (2682); Patient Device Interaction Problem (4001); Loosening of Implant Not Related to Bone-Ingrowth (4002)
|
Patient Problem
Unspecified Infection (1930)
|
Event Date 02/23/2022 |
Event Type
Injury
|
Event Description
|
It was reported, that: the patient underwent a hip arthroplasty on (b)(6) 2019.The patient was revised on (b)(6) 2022, due to undersized implant, loosening, and infection.
|
|
Manufacturer Narrative
|
(b)(4).Initial report.Report source, foreign - event occurred in (b)(6).The client has indicated that the product will not be returned to zimmer biomet for an investigation.Associated products: medical product: arcos 14x190mm spl tpr dist, catalogue number: 11-300914, lot number: 197870.Medical product: g7 osseoti multihole 60mm g, catalogue number: 110010268, lot number: 6512821 medical product: arcos con sz a std 70mm, catalogue number: 11-301321, lot number: 835680.Medical product: g7 neutral e1 liner 36mm g, catalogue number: 010000859, lot number: 6197089.The investigation is currently underway.Once the investigation has concluded, a follow-up mdr will be submitted.Device discarded.
|
|
Event Description
|
It was reported, that: a patient underwent a hip arthroplasty on (b)(6) 2019.The patient was revised on feb 23, 2022, due to an undersized implant, loosening, and infection.
|
|
Manufacturer Narrative
|
(b)(4).Complaint summary: no product was returned or pictures provided; visual and dimensional evaluations could not be performed.A review of the device history records identified no related deviations or anomalies during manufacturing.The device is used for treatment.The reported products were reviewed for compatibility with no issues noted.Complaint history review for (b)(4) identified one (1) previous complaint with a similar complaint category (revision due to infection).Medical records/radiographs were provided and reviewed by a health care professional as part of a linked complaint: can you identify/confirm any signs of loosening, wear, radiolucency, or any other contributing factor such as malalignment that would cause issues with any of the components on the x-ray? no, none of the above is identified.Alignment is maintained.Can you comment on the appropriateness of the size of the implant relative to the patient¿s anatomy? on the image submitted, implant size appears appropriate.During the investigation process, a review of the sterile certifications and found to be conforming with no applicable deviations.Devices were verified to have gone through an acceptable sterilization process following iso/aami/astm & eu published guidelines.There are multiple factors that may contribute to an infection that is outside the control of zimmer biomet, such as external factors, i.E.Hospital/surgical environment, provider related risk factors, and/or patient comorbidities/risk factors.As there are no indications of a product or process issues identified affecting implant safety or effectiveness, therefore implanted products are not identified as the source or contributing to the reported infection.The investigation could not verify or identify any evidence of product contribution to the reported problem. no corrective actions, preventive actions, or field actions resulted after the investigation of this event.If any additional information is discovered or received that may adjust any conclusions or data, a supplemental report will be rendered accordingly.Zimmer biomet will continue to monitor for trends.
|
|
Search Alerts/Recalls
|
|