MAUDE Adverse Event Report: AMO PUERTO RICO MFG. INC. TECNIS IOL; LENS, INTRAOCULAR, TORIC OPTICS

Model Number DIU150

Device Problems Break (1069); Mechanical Problem (1384); Failure to Advance (2524)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/08/2022

Event Type  malfunction  

Event Description

It was reported that the preloaded intraocular lens (iol) would not advance as the plunger rod was going above the lens when advanced and it would not push the lens forward.The lens was actually stuck, fused to the bottom of the injector, almost as if high temperature had melted the acrylic material onto the cartridge.The lens had to be peeled off the bottom of the injector in order to free it from its original position.There was no patient contact.The procedure was completed using another lens of same model and diopter.No further information was provided.

Manufacturer Narrative

The device was not returned for analysis.Therefore, a failure analysis of the complaint device cannot be completed.A review of the device history record, complaint trending, and risk documentation for this device will be performed.Upon completion of the review, if there is any further relevant information a supplemental medwatch will be filed.An attempt has been made to obtain missing information; however, to date, the information has not been received.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.

Manufacturer Narrative

Section d9: device available for evaluation: yes.Section d9: returned to manufacturer on: apr 6, 2022.Section h3: device evaluated by manufacturer: yes.Device evaluation: the product was returned to the manufacturing site for evaluation.Visual inspection under magnification was performed and revealed that the lens was stuck in the cartridge and overridden by the plunger rod.The simplicity was disassembled, and no assembly issues were observed.Dried ophthalmic viscoelastic was observed inside the lens module and cartridge, and the plunger tip was damaged.The complaint lens was removed from the cartridge and visually inspected and dry ophthalmic viscoelastic was observed on the lens.The lens was cleaned and visually inspected and scratches were observed.No additional issues were observed with the returned product.Conclusion: the reported complaint issue was observed during product evaluation; however, based on the complaint investigation results the complaint issue could not be confirmed to be related to the manufacturing or design process.Therefore, there is no indication of a product deficiency or product malfunction.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.

• Brand Name: TECNIS IOL
• Type of Device: LENS, INTRAOCULAR, TORIC OPTICS
• Manufacturer (Section D): AMO PUERTO RICO MFG. INC.; road 402 north, anasco ind. pk; anasco PR 00610
• Manufacturer Contact: somyata nagpal ; 1700 e st andrew place; santa ana, CA 92705 ; 7142478552
• MDR Report Key: 13961830
• MDR Text Key: 289883572
• Report Number: 3012236936-2022-00820
• Device Sequence Number: 1
• Product Code: MJP
• UDI-Device Identifier: 05050474746596
• UDI-Public: (01)05050474746596(17)241031
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P980040
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 06/23/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: DIU150
• Device Catalogue Number: DIU150U225
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Initial Date Manufacturer Received: 03/08/2022
• Initial Date FDA Received: 03/31/2022
• Supplement Dates Manufacturer Received: 06/13/2022
• Supplement Dates FDA Received: 06/23/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 10/31/2021
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1