Model Number SN60WF |
Device Problem
Appropriate Term/Code Not Available (3191)
|
Patient Problem
Blurred Vision (2137)
|
Event Date 01/01/2018 |
Event Type
malfunction
|
Manufacturer Narrative
|
A sample device was not returned for analysis.Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional reportable information becomes available.The manufacturer internal reference number is: (b)(4).
|
|
Event Description
|
A physician reported following the intraocular lens implantation which was implanted in 2014, the patient had experienced blurry vision and glistenings after four years from the implantation.Additional information has been requested and received stating the patient is waiting for an explant.No medication has been used to treat the event of glistenings.Artificial tears were used but no specific indication was mentioned, the patient did not have dry eyes.Eye inspection revealed no other pathology other than lens glistening.Patient had va of 20/20 but not clear vision.There was no harm to the patient and the patient issues have resolved.
|
|
Manufacturer Narrative
|
The product was not returned for analysis.Two photos which appear to be the same photo at different magnifications were submitted and reviewed.The photo(s) were oblique slit beam photos focused in the center of the iol.The photo is of good clarity and is significant for diffuse refractive particles that appear to be located within the body of the iol.These particles are typically referred to as microvacuoles or glistenings.It is difficult to determine the depth of these particles from the photo, and etiology cannot be stated with certainty.Based on the content provided in the medical information review, microvacuoles/glistenings have been observed but the cause cannot be determined.A definitive determination of damage cannot be made without the evaluation of the physical product.A final root cause cannot be determined based on available information.Based on the results from the product history record, the products met release criteria.The manufacturer internal reference number is: (b)(4).
|
|
Search Alerts/Recalls
|