SMITH & NEPHEW, INC. OXINIUM FEM HD 12/14 28MM +0; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER
|
Back to Search Results |
|
Model Number 71342800 |
Device Problem
Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problems
Nerve Damage (1979); Hip Fracture (2349); Unequal Limb Length (4534)
|
Event Date 05/05/2021 |
Event Type
Injury
|
Event Description
|
Bilateral patient.It was reported that, after a left bhr surgery was performed on (b)(6) 2007 due to progressing disabling of both hips, pain, and avascular necrosis, the patient suffered left hip impingement, for which left revision surgery was conducted on (b)(6) 2007.After that event, the patient experienced heterotopic ossification and elevated metal ions, for which a second revision surgery was performed on (b)(6) 2021.Subsequently, the patient experienced partial sciatic nerve palsy, leg length discrepancy and left hip greater trochanteric fracture.This adverse event was treated with a third revision surgery on (b)(6) 2021.The patient's current status is unknown.
|
|
Manufacturer Narrative
|
Internal complaint reference case (b)(4).
|
|
Manufacturer Narrative
|
H3, h6: the device was not returned for evaluation and the reported event could not be confirmed.The clinical/medical investigation concluded that, the clinical root cause of the reported leg length discrepancy and left hip greater trochanteric fracture cannot be confirmed; however, the mixed manufacture construct cannot be ruled out as a contributing factor to the reported events.The s&n endoprostheses ifu (81007036 rev.G 2020-11) instructs ¿do not mix components from other manufacturers.¿ the partial sciatic nerve palsy is a known complication of hip replacement surgery and is related to the procedure and not the device.It cannot be concluded the nerve palsy is associated with a mal performance of the implant.A review of the manufacturing records did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.A review of complaint history for the part number over the past 12 months and for the batch number based on historical data of the device did not reveal similar events for the listed device.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.A review of the instructions for use for this device provides complete guidelines of indications, contraindications, warnings and precautions and possible adverse effects that may occur preoperative, during surgery or post operative.A historical review concluded that there are no prior actions related to this product and event.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.Some potential probable causes for this event could include but not limited to procedural/user error, surgical complication or patient condition.The contribution of the device to the reported event could not be corroborated.Based on this investigation, the need for corrective action is not indicated.Without the return of the actual product involved, our investigation could not proceed.Should the device or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|
|
Search Alerts/Recalls
|
|
|