• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: NUVASIVE, INCORPORATED NUVASIVE X-CORE EXPANDABLE VBR SYSTEM, NUVASIVE X-CORE MINI CERVICAL EXPANDABLE; SPINAL VERTEBRAL BODY REPLACEMENT DEVICE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

NUVASIVE, INCORPORATED NUVASIVE X-CORE EXPANDABLE VBR SYSTEM, NUVASIVE X-CORE MINI CERVICAL EXPANDABLE; SPINAL VERTEBRAL BODY REPLACEMENT DEVICE Back to Search Results
Model Number 7180033006
Device Problem Migration (4003)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 04/19/2022
Event Type  malfunction  
Event Description
On (b)(6) 2022 a patient underwent a posterior vertebral replacement procedure from l3 to l5.And the surgery was completed without issue.On (b)(6) 2022 it was discover during a postoperative x-ray that the implanted core replacement had migrated at l4.The patient was not reported to be experiencing any pain or adverse consequences as a consequence of the device migration.On (b)(6) 2022 a revision occurred where the migrated implant was repositioned and the expansion level was adjusted without issue.The patient is reported to be doing well post revision.
 
Manufacturer Narrative
No device was returned as it remains in-situ and no radiographs could be provided confirming the alleged complaint.The patients-op activity levels are unknown.The root cause of the event is unknown but review of the provided information suggests insufficient implant expansion that was corrected during the reported revision.No product failure reported and no additional investigation is required.Label review: potential adverse events and complications - as with any major surgical procedures, there are risks involved in orthopedic surgery.Infrequent operative and postoperative complications that may result in the need for additional surgeries." potential risks identified with the use of this system, which may require additional surgery, include: bending, fracture or loosening of implant component(s)." warnings, cautions and precautions - the subject device is intended for use only as indicated.The implantation of spinal systems should be performed only by experienced spinal surgeons with specific training in the use of this spinal system because this is a technically demanding procedure presenting a risk of serious injury to the patient.Correct selection of the implant is extremely important.The potential for success is increased by the selection of the proper size of the implant." patient education: preoperative instructions to the patient are essential.The patient should be made aware of the limitations of the implant and potential risks of the surgery.The patient should be instructed to limit postoperative activity, as this will reduce the risk of bent, broken or loose implant components.The patient must be made aware that implant components may bend, break or loosen even though restrictions in activity are followed." to obtain a surgical technique manual or should any information regarding the products or their uses be required, please contact your local representative or nuvasive directly at +1-800-475-9131.You may also email: info@nuvasive.Comdevice remains in-situ.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
NUVASIVE X-CORE EXPANDABLE VBR SYSTEM, NUVASIVE X-CORE MINI CERVICAL EXPANDABLE
Type of Device
SPINAL VERTEBRAL BODY REPLACEMENT DEVICE
Manufacturer (Section D)
NUVASIVE, INCORPORATED
7475 lusk boulevard
san diego CA 92121
Manufacturer (Section G)
NUVASIVE, INCORPORATED
7475 lusk boulevard
san diego CA 92121
Manufacturer Contact
geoff gannon
7475 lusk boulevard
san diego, CA 92121
MDR Report Key14577827
MDR Text Key301591904
Report Number2031966-2022-00099
Device Sequence Number1
Product Code PLR
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
K193506
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,Company Representative
Reporter Occupation Physician
Type of Report Initial
Report Date 06/02/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number7180033006
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 04/19/2022
Initial Date FDA Received06/02/2022
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Treatment
618500006 X2
Patient SexPrefer Not To Disclose
-
-