|
Model Number 6600- |
Device Problem
Complete Blockage (1094)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/08/2022 |
Event Type
malfunction
|
Event Description
|
The customer reported that the luer lock connection pieces are faulty.They were completely blocked so weren't draining the fluid.No injuries occurred.
|
|
Manufacturer Narrative
|
An investigation is currently underway.Upon completion, the results will be forwarded.
|
|
Manufacturer Narrative
|
The device history record was reviewed, and indicated that no abnormal process conditions were present during the manufacturing of the product that could have led to the reported issue.The device history record review showed that all acceptance criteria inspections per established sampling levels were within acceptable limits during the production process.The device was manufactured on october 28, 2021.One digital image was received for the investigation.The digital image was visually inspected according to procedure, but the reported issue could not be confirmed without a physical sample to evaluate.The investigation was carried out with the multifunctional team.The process was reviewed, and it was verified that all processes and controls were carried out correctly, including the packaging and all inspections carried out on the product.No abnormal conditions were found that could trigger the reported condition.If a sample is received at a later date, the investigation will be updated accordingly.A corrective action is not applicable at this time.We will continue to monitor customer complaint and feedback notifications for adverse trends that require immediate attention.This complaint will be used for tracking and trending purposes.
|
|
Manufacturer Narrative
|
The device history record (dhr) was reviewed and indicated that no abnormal process conditions were present during the manufacturing of the product that could have led to the reported issue.The dhr review showed that all acceptance criteria inspections per established sampling levels were within acceptable limits during the production process.The device was manufactured on october 28, 2021.Two decontaminated physical samples without the lot number were received at the manufacturing site for investigation in addition to the photos provided.The samples were visually inspected, and the reported condition was confirmed; the pvc tubes had excess solvent in the valve and the pvc tube, and the valve do not drain.After investigation of the failure mode, a definitive root cause could not be determined.The assembly process has been developed in accordance with the approved specifications.As a containment measure staff was notified of the reported condition, with the purpose of raising staff awareness.We will continue to monitor customer complaints and feedback notifications for adverse trends that require immediate attention.
|
|
Search Alerts/Recalls
|
|
|