|
Model Number SIGTRSB60AMT |
Device Problems
Misfire (2532); Separation Failure (2547)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 05/18/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted the device to be partially fired.Functionally, the reload was loaded into a representative instrument from for functional testing.The interlock was overridden and the reload was applied to test media.The test media was cleanly transected and the distal anvil and cartridge sutures released.The reload interlock was tested and found to function properly.It was reported that after firing, the reinforcement material did not release from the device as expected.The reported issue was confirmed.The product analysis noted evidence that the device was not used as intended.This issue may occur when the firing handle has not been completely cycled.If the instrument return knobs are retracted at any point once the firing cycle has begun, the reload will engage into safety interlock and prevent further attempts to fire by ceasing the placement of staples and tissue transection and prevent patient harm.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.The instructions included with this device provide the following guidance: failure to completely fire the reload will result in an incomplete cut and/or incomplete staple formation, which may result in poor hemostasis and/or leakage.If information is provided in the future, a supplemental report will be issued.
|
|
Event Description
|
According to the reporter, during a laparoscopic sleeve gastrectomy, while transecting the stomach, the green suture on the cartridge and anvil of the reload with tissue reinforcement system( trs) did not severe during the firing of the stapler.To resolve the issue, the surgeon used a laparoscopic scissor to manually cut suture.There was no patient injury.Medtronic's evaluation of the device found that visual examination of the staple cartridge noted that the reload was partially fired to the distal end with the interlock engaged.Replication of the partial fire condition with interlock engagement may occur when the firing handle has not been completely cycled.
|
|
Search Alerts/Recalls
|
|
|