Model Number M00522610 |
Device Problem
Activation, Positioning or Separation Problem (2906)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 07/07/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Medical device code (b)(4) captures the reportable event of clip unable to release from catheter.The device has not been received for analysis.Upon receipt and completion of the device analysis, if there is any further relevant information from that review, a supplemental medwatch will be filed.
|
|
Event Description
|
It was reported to boston scientific corporation that a resolution clip device was used during a colonoscopy procedure performed on (b)(6)2022.After the slider was tightened backward, the clip was able to grasp and lock onto tissue; however, the clip was unable to release from the catheter to deploy.The procedure was completed with another resolution clip device.There were no patient complications reported as a result of this event.The patient's condition at the conclusion of the procedure was reported to be stable.
|
|
Event Description
|
It was reported to boston scientific corporation that a resolution clip device was used during a colonoscopy procedure performed on (b)(6) 2022.After the slider was tightened backward, the clip was able to grasp and lock onto tissue.However, the clip was unable to release from the catheter to deploy.The procedure was completed with another resolution clip device.There were no patient complications reported as a result of this event.The patient's condition at the conclusion of the procedure was reported to be stable.
|
|
Manufacturer Narrative
|
H6: medical device code a15 captures the reportable event of clip unable to release from catheter.Block h10: investigation results the returned resolution clip device was analyzed, and a visual evaluation noted that the device was returned with the clip assembly attached.The device was returned without the over-sheath.Microscopic examination was performed and it was found that there was no activation performed on the clip assembly.Functional evaluation was performed and the clip assembly can open its arms within specification under the tortuous path.Additionally, the clip assembly was able to perform the first activation and could be released from the catheter without problem.No other problems with the device were noted.The reported event of clip unable to release from catheter was not confirmed as the device was returned with the clip assembly still attached and the clip was able to release from the catheter without problems.No problems were found that could have reduced the performance of the device during the procedure.The returned device review showed no evidence of either the alleged(s) or any defect which could have contributed to the event.Therefore, the most probable root cause for this complaint is no problem detected.A review of the manufacturing documentation for this device revealed that no anomalies or deviations related to the event occurred during manufacturing.
|
|
Search Alerts/Recalls
|