Model Number 10033 |
Device Problem
Device Emits Odor (1425)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 08/05/2022 |
Event Type
malfunction
|
Event Description
|
While onsite for a separate issue, the field service engineer noted a ¿haze¿ or mist emitting from the sterrad® nx sterilizer.There was no report of any injuries or human reactions.This event is being reported as a malfunction report subsequent to a serious injury.
|
|
Manufacturer Narrative
|
Initial reporter phone number: (b)(6).The field service engineer replaced the adapter converter, catalytic converter, oil mist filter, vacuum pump oil, and the oil return solenoid valve and male connector to resolve the haze/mist issue.Unit meets specifications and was returned to service.This report is being submitted pursuant to the provisions of 21 cfr, part 4.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by advanced sterilization products, or its employees that the report constitutes an admission that the product, advanced sterilization products, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Asp complaint ref #: (b)(4).
|
|
Manufacturer Narrative
|
Additional parts were returned for further analysis on 07-dec-2022.H3: asp investigation summary: the investigation included a review of the device history record (dhr), trending analysis of the haze/mist issue, system risk analysis (sra), and functional analysis trending analysis of the haze/mist issue for the sterrad® nx unit was reviewed for the prior six months from the event date, and no significant trend was observed.Review of risk documentation shows the risk for exposure to toxic or corrosive material to be "low." the oil return solenoid valve and male tube connector were returned and successfully completed a test cycle with no mist, odor, smells, vapor, or smoke observed.The reason for the return and failure of the oil return solenoid valve and male tube connector was not confirmed.The assignable cause of the haze/mist is likely due to the adapter converter, catalytic converter, oil mist filter, vacuum pump oil, oil return solenoid valve and the male tube connector.The asp field service engineer replaced the parts and confirmed the sterrad® nx met functional specifications after service.The issue was resolved at the customer facility.Asp will continue to track and trend this issue.Asp complaint ref #: (b)(4).
|
|
Manufacturer Narrative
|
The device history record (dhr) was reviewed and no issues relating to the failure mode were noted.The involved unit met manufacturer specifications at the time of release.The oil mist filter was returned, and the visual inspection noted a broken and deteriorated hose connector.The reason for the return and failure of the oil mist filter was confirmed.A filter replacement element was returned and successfully completed a test cycle with no failures or faults.No mist, odor, smells, vapor, or smoke was observed.Visual inspection yielded no unusual findings, problems, defects, or anomalies.The reason for the return and failure of the filter replacement element was not confirmed.Asp complaint ref #: (b)(4).
|
|
Search Alerts/Recalls
|
|