Model Number 46531313 |
Device Problem
Material Split, Cut or Torn (4008)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 08/26/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Richard wolf medical instruments corporation (rwmic) is submitting this report on behalf of rwgmbh.Rwgmbh considers this matter open.However, in the event rwgmbh receives any additional information a follow up report will be submitted to fda.
|
|
Event Description
|
Richard wolf gmbh complaint reference number: (b)(4).The hospital informed richard wolf gmbh of the following: the patient presented for surgical hysteroscopy for hypermenorrhoea.Ablation of a submuscular myoma.During the procedure, half of the resection loop was torn off: during the first incision at the myoma nodal stalk and pulling back the loop into the working channel.The operation time was extended by 1.5 hours.In addition, an x-ray abdomen survey and a hysteroscopy were performed.Rwgmbh awareness date, 26-aug-2022.
|
|
Manufacturer Narrative
|
Additional information was received from the user facility that the erbe vio 300d generator with a bip cut+ 4 setting was used.It was also stated that the tear occurred during the first incision.The patient's condition after the application was described as good.During the inspection of the cutting electrode bipo 21fr 46531313, batch # 21003482 by richard wolf gmbh, the insulation shows a black discoloration and suggests a thermal influence, however the broken edge of the electrode looks shiny and smooth with no discoloration which indicates a potential mechanical overload of the wire hanger.The hf generator and the power setting specified by the user are in general principle suitable for this type of resection snare and correspond to the specifications of the rated voltage of the resection electrode.The cutting electrode bipo 21fr 46531313, batch # 21003482 was manufactured on 06/sep/2021.The batch consisted of 119 paks of electrodes.No issue was identified during production and no further complaints were received from the reported batch.The ifu ga-d 349 / en-us / 2015-02 v6.0 / eco 2014-0506 contains safety notes of avoiding excessive force in use of the device in section 7 use.The subject issue of breaking the device in use is present in the risk management file bb2 - not reusable electrodes, rev.: 03.The overall probability of occurrence for this issue remains at previously defined levels and overall risk of the device remains in the acceptable category.
|
|
Search Alerts/Recalls
|
|