|
Model Number 3040 |
Device Problems
Inflation Problem (1310); Leak/Splash (1354); Connection Problem (2900)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 07/22/2022 |
Event Type
malfunction
|
Event Description
|
Reportable based on device analysis completed on 11oct2022.It was reported that the device could not inflate.An encore 26 inflation device was selected for use.During preparation, when connecting the device to the balloon, an inflation issue was noted.There was a leak observed in the hub luer area.The device was replaced with another of same device.No complications were reported.However, device analysis revealed that the needle failed to zero between 0 atm and 26 atm.
|
|
Manufacturer Narrative
|
Device evaluated by manufacturer: the device was returned for analysis.Visual inspection was performed.The gauge needle was at 0 atm when received.The device does not have visual defects.The luer connector was inspected and no damages were noted.No damages were noted in the returned device.Functional test was performed.A functional test of the complaint device was carried out using a bsc stopcock.The purpose is to ensure that the unit meets the required specification.The pressure damping test is to ensure the unit falls from 13 atm to 0 atm within 1 second.The unit passed the test.The vacuum test was performed.The unit was primed with 5 ml of water before withdrawing the plunger to create a vacuum.There was no bubble leakage.The side load test involved applying a load of 3.5 +/- 0.1 kg to the proximal end of the handle.The unit pass if the unit maintains a vacuum in this position.The unit passes the test.The gauge accuracy test at 13 atm, 26 atm & 0 atm to assess the accuracy of the gauge under pressurization.Results passed the test.The device locking mechanism test was performed.This is where the plunger handle is rotated to achieve 26 atm and this test is repeated 20 times consecutively.However, in the cycle number 4 the device was not return to zero, the needle failed to zero between 0 atm and 26 atm.
|
|
Search Alerts/Recalls
|
|
|