|
Model Number MAJ-2115 |
Device Problem
Separation Problem (4043)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/21/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Related patient identifiers: the customer reported that multiple connecting tubes were bad.(b)(6) (addresses model number maj-2110; lot# 0ya), (b)(6) (addresses model number maj-2112; lot# 0za), (b)(6) (addresses model number maj-2113; lot# 0ya) (b)(6) (addresses model number maj-2114; lot# 0ya, (b)(6) (addresses model number maj-2115; lot# 0xa and (b)(6) (addresses model number maj-2330; lot# 0xa) the customer reported that the connectors will be returned.However, to date, the connecting tube has not been returned.The investigation is ongoing.A supplemental report will be submitted upon completion of the investigation.
|
|
Event Description
|
The customer reported to olympus technical assistance center (tac), there were multiples oer-elite connectors that were ¿bad¿.The customer reported that it was an out of box failure.There was no patient involvement.
|
|
Event Description
|
Customer confirmed all the connectors broke at the metal clips.
|
|
Manufacturer Narrative
|
This report is being submitted to provide additional information based on the legal manufacturer¿s final investigation, device evaluation, customer follow-up and g3 correction.B5: updated with information received from the customer.Correction to g3 of the initial medwatch.The aware date should be 29-aug-2022.The subject device was manufactured in october, 2010 but an exact date is unavailable as the complete serial number was not provided.The device history record was unable to be reviewed for this device since the complete serial number was not provided.However, olympus only releases products to market that meet all manufacturing specifications and final product release criteria.The olympus service center received the returned devices and confirmed the damaged connecting tube.Based on the results of the device investigation, the root cause of the event could not be determined, however, this issue was found to likely be the result of an external load applied to the cleaning tube, making it impossible to connect.An external load on the irrigation tube may be caused by the user applying force in the wrong direction.The event can be prevented by following the instructions for use which state: ¿abnormalities can be detected by conducting the following inspections: 9.Preparation and inspection.2.Move the lock levers of the reprocessor side connector to make sure that they function properly and are not broken¿.Olympus will continue to monitor field performance for this device.
|
|
Manufacturer Narrative
|
This report is being supplemented to provide a correction to the legal manufacturer's final investigation.Based on the results of the corrected investigation, there has since been a design change to prevent reoccurrence.
|
|
Search Alerts/Recalls
|
|
|