|
Model Number 3000 |
Device Problems
Application Program Problem: Parameter Calculation Error (1449); Output below Specifications (3004)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/01/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Livanova usa, inc.Submits this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation, based on information that livanova has obtained, but may not have been able to investigate or verify prior to the date the report was required by the fda.This report does not constitute an admission, or a conclusion by fda or anyone else, that the device, livanova, or livanova's employees caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any "defects¿ or "malfunctions.¿ these words are incorporated into the fda 3500a medwatch form by the fda, and livanova objects to their use.
|
|
Event Description
|
During a battery replacement while trying to program the new generator to the old settings, a low output current error message was received.They then lowered the settings and the error resolved and all values were within normal limits.No other relevant information has been received to date.
|
|
Event Description
|
Internal testing and data review identified that false low output current messages can occur when the autostim threshold is changed during the 15 minute temporary test.Reviewing log files, it was found that during this programming event, the autostim threshold for nighttime settings was adjusted from 50% to 40%.Once the user programs on day/night settings, the programmer will instruct the ipg to start using night mode settings for the temporary (15 minute test).If any settings not related to stimulation parameters (current, on time, off time, etc) are changed, the programmer will command the ipg to stop the temporary test and the ipg will re-eneter day mode settings.When a system diagnostics is performed, the programmer errantly compares the diagnostics results (which were run with daytime stim parameters) against nighttime settings even though ipg is in day mode.Since night time stim (2.25ma) is higher than day time stim (2ma), this is interpreted as low output current.Based on the reported programming sequence that occurred that day, it was consistent with the false low output current mechanism described above.Therefore, the patient's generator is expected to be able to deliver therapy as programmed.
|
|
Search Alerts/Recalls
|
|
|