It was reported that an ultrathane cope nephroureterostomy set "broke" while being prepped for an unspecified procedure on an unknown patient.As a result, the complaint device was not used.No adverse effects have been reported.The manufacturer received the device on (b)(6) 2023 for evaluation.During the preliminary investigation, the flare was found to be folded and leakage at the hub was discovered during functional testing.Additional information regarding event details and patient outcome has been requested but is currently unavailable.
|
In additional information received 27jan2023, it was reported that the device was required for a nu (nephroureterostomy) placement.Also, it was clarified as to what was meant by broke, meaning the "cap" or hub was cracked.A new catheter was used to complete the procedure, and it was verified that the patient did not experience any adverse effects due this occurrence.
|
Blank fields on this form indicate the information is unknown, unavailable, or unchanged.Additional information: b5, h6 (annex a).This report includes information known at this time.A follow-up report will be submitted should additional relevant information become available.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned or that a death or serious injury occurred; nor is it admission that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|
Investigation ¿ evaluation: cook medical received a complaint from a representative at (b)(6).It was reported that leakage was discovered in an ultrathane cope nephroureterostomy set (rpn: ult8.5-8.5-24-nucl-b-rh; lot #: 14840184) during prepping for an unspecified procedure.A new device was placed to complete the procedure.No adverse effects were reported.Reviews of the complaint history, device history record (dhr), drawings, instructions for use (ifu), manufacturing instructions, quality control procedures, and specifications of the device, as well as a visual inspection and functional test, were conducted during the investigation.One device was received in an open and prepped condition.The investigation confirmed the number of threads visible between the cap / mac-loc adapter connection site passed the required gap gauge requirement.During tabletop testing, a leak test confirmed fluid escaping at the cap / mac-loc adaptor connection site.A visual examination discovered a section of the flare bunched/folded inside the lumen of the mac-loc adaptor.The cap and mac-loc adaptor were disassembled, discovering the presence of thread marks, a crease, and a tear in the flare.Additionally, a document-based investigation evaluation was performed.In response to this incident, cook completed a review of the product device master record (dmr) and concluded that sufficient inspection activities are in place to identify this failure mode prior to distribution.Cook also reviewed the device history record (dhr).The dhr for lot 14840184, and all sub assembly lots, confirmed one relevant recorded nonconformance for "flare inadequate".This one device was scrapped prior to further processing.The information provided upon review of the returned device indicates the device was manufactured out of specification.However, review of the dmr and dhr suggests that there are no additional nonconforming devices in house or in the field.Cook reviewed the product labeling for the complaint device.The instructions for use (ifu) [t_nucl_rev5, cope nephroureterostomy stents] states the following.Precautions: patients with indwelling drainage catheters should be evaluated routinely to ensure continuous function of the catheter.How supplied: upon removal from package, inspect the product to ensure no damage has occurred.Based on the information provided, inspection of the returned device, and the results of the investigation, it was determined the cause of this event is related to a manufacturing deficiency.The appropriate responsible manufacturing department was issued a defect awareness training.The appropriate personnel have been notified.Cook will continue to monitor for similar complaints.Per the risk assessment no further action is required.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|