• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: OPSENS SAVVYWIRE; PRE-SHAPED PRESSURE GUIDEWIRE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

OPSENS SAVVYWIRE; PRE-SHAPED PRESSURE GUIDEWIRE Back to Search Results
Model Number F3001
Device Problem Adverse Event Without Identified Device or Use Problem (2993)
Patient Problem Pericardial Effusion (3271)
Event Date 01/05/2023
Event Type  Death  
Manufacturer Narrative
Investigation of the wire is not possible as the hospital discarded it by the end of the procedure.According to the device history record, the lot number osw-00030 has been released following specifications, no dr nor nc were documented.Although as stated by the physician the source of the pericardial effusion or at what point it happened is unknown, he does not feel that the savvy wire has a relation to the unfortunate outcome.The risks associated with the unfortunate event are well documented and are disclosed in the savvywire instructions for use (ifu): adverse events that may result from the use of this device include, but are not limited to: access site or vessels complications, additional surgical procedure, allergic reactions, amputation, aneurysm, angina, arrhythmia, bleeding, cardiac or vessel perforation/dissection, coronary obstruction, death, embolism, fibrillation, foreign body/wire fracture, heart block, hematoma, hypotension/hypertension, infection, kidney injury/failure, myocardial infarction, need for permanent pacemaker, pericardial effusion, pneumothorax, stroke or other neurologic event, spasm, tamponade, thrombus, valve dysfunction or complications, vasospasm, vessel occlusion, wire entrapment/entanglement, x-ray radiation exposure complications.The ifu also mentions the following precaution such as: never advance, pull or torque a savvywire against resistance without first determining the reason for the resistance under fluoroscopy.Excessive force against resistance may result in damage to the wire and/or to the anatomy.Fluoroscopic guidance should be used during manipulations of the savvywire.Care should be taken when the tip of the savvywire is positioned, moved or torqued in the ventricle.
 
Event Description
Savvywire was properly placed into lv with pigtail catheter.After valve was deployed echo tee showed an infusion.Echo physician unsure of location of infusion or what caused the infusion.Patient was tapped to address infusion.Subsequently, the team converted to perform open heart procedure.Patient later expired.Cause of infusion is unknown.Physician does not feel that it was opsens product related.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
SAVVYWIRE
Type of Device
PRE-SHAPED PRESSURE GUIDEWIRE
Manufacturer (Section D)
OPSENS
750
boulevard parc technologique
quebec, quebec G1P4S 3
CA  G1P4S3
Manufacturer (Section G)
OPSENS
750
boulevard parc technologique
quebec, quebec G1P4S 3
CA   G1P4S3
Manufacturer Contact
maryem oudhini
750
boulevard parc technologique
quebec, quebec G1P4S-3
CA   G1P4S3
MDR Report Key16359022
MDR Text Key309369630
Report Number3008061490-2023-00001
Device Sequence Number1
Product Code DXO
UDI-Device Identifier07540184030019
UDI-Public(01)07540184030019(11)220607(17)240607(10)OSW-0030
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K213854
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional
Reporter Occupation Physician
Type of Report Initial
Report Date 01/17/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Model NumberF3001
Device Catalogue NumberSAVVYWIRE XS
Device Lot NumberOSW-0030
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 01/17/2023
Initial Date FDA Received02/10/2023
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured06/07/2022
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Death;
-
-