Sample returned for investigation.The reported failure was verified from the returned sample.Visual inspection performed using mircroscope.No dents or corrosion identified that could cause grasper to brake.Grasper pull force test was performed according to verification protocol on 3 retention smaple.The grasper of the retention samples passed test without breaking.It is concluded that the grasper jaws meet the specification and function as intended.Simulation test was done on order to break the grasper joint by activating the grasper and forcing it on a flat surface.When forcing the grasper joint over the opening rang the grasper would brake.Based on the reported failure and he investigation results it is suspected that the grasper was actived and forced opened outside the opening range.Ifu includes warning and cautions to prevent damage to grasper.
|