• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: C.R. BARD INC. (COVINGTON) -1018233 SENSICA UO SYSTEM

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

C.R. BARD INC. (COVINGTON) -1018233 SENSICA UO SYSTEM Back to Search Results
Model Number SCCS1001
Device Problem Restricted Flow rate (1248)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 02/10/2023
Event Type  malfunction  
Event Description
It was reported that on february 8, a registered nurse provided feedback to the sensica reimplementation survey that alleges deficiencies related to the device performance and safety.The registered nurse responded that the sensica urine output system did not measure urine output within the specifications of the instruction for use for two hours over the course of a 12-hour shift when compared to manual urometer measurements.Case 1 was sensica read 406ml, urometer read 335ml (22 percent above the urometer reading) case 2 was sensica read 341ml, urometer read 360ml (5.3 percent below the urometer reading) additionally, the registered nurse noted that the sensica foley tray tubing did not drain well.
 
Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.
 
Event Description
It was reported that on february 8, an registered nurse provided feedback to the sensica reimplementation survey that alleges deficiencies related to the device performance and safety.The registered nurse responded that the sensica urine output system did not measure urine output within the specifications of the instruction for use for two hours over the course of a 12 hour shift when compared to manual urometer measurements.Case 1 was sensica read 406ml, urometer read 335ml (22 percent above the urometer reading) case 2 was sensica read 341ml, urometer read 360ml (5.3 percent below the urometer reading) additionally, the registered nurse noted that the sensica foley tray tubing did not drain well.
 
Manufacturer Narrative
The reported issue was inconclusive.The root cause of the reported issue could not be determined.A potential root cause is incorrect part geometry.However this cannot be confirmed.Registered nurse provided feedback to the sensica reimplementation survey that alleges deficiencies related to the device performance and safety.Registered nurse noted that the sensica foley tray tubing did not drain well.All good faith attempts have been made to obtain additional information.The outcome of the repair cannot be determined at this time.In the event that information regarding the outcome of the repair and the status of the device is received, this record will be reopened to update the investigation.The device was not returned for evaluation.The lot number is unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: "1.1 introduction this manual provides the indications, contraindications, warnings, precautions, and instructions for use with the bd sensica¿ urine output system.Carefully read this manual in its entirety before using the bd sensica¿ urine output system.Failure to follow these instructions may result in improper use of this device.Contact customer service at +1.844.823.5433 with any questions about the information contained in this manual or about the operation and safety of the bd sensica¿ urine output system.1.2 indications for use indications: the bd sensica¿ urine output system is an automated system for continuous monitoring of urine output (uo) and core bladder temperature when connected to a temperaturesensing foley catheter.Target population: the bd sensica¿ urine output system is intended for bedside monitoring of urine output for any patient with an indwelling, urological catheter, drainage tubing and collection bag, typically in critical care settings or where close monitoring of urine output is desired.The bd sensica¿ urine output system is also intended for monitoring core bladder temperature when used with the bd sensica¿ temperature monitor module and a standard, 400 series temperature-sensing foley catheter.1.3 contraindications there are no known contraindications for use with patients who have indwelling, urological catheters in place.1.4 warnings general warnings medical electrical equipment requires special precautions regarding electromagnetic compatibility (emc) and needs to be installed and put into service according to the emc information provided in the charts at the end of these instructions for use (appendix a).Portable and mobile rf communications equipment can affect medical electrical equipment.The bd sensica¿ urine output system should not be stacked with other equipment.The bd sensica¿ urine output system has a degree of protection against electric shock of applied parts classified as type bf.This device is classified as an iec class 2 product.When using class 1 power partners peamd72-10-b2 power supply, to avoid the risk of electric shock, this equipment must only be connected to a supply main with protective earth.Do not immerse or submerge the bd sensica¿urine output stand, display monitor, ring, temperature monitor module, or temperature sensor cables in water or other liquids.Do not pour liquids over the display monitor, ring, temperature monitor or cables.If liquids accidentally spill onto device(s), wipe off liquid with soft cloth as soon as possible.See section 14 for complete care instructions.This device is not suitable for use in the presence of flammable mixtures.This device is not suitable for use in oxygen rich environments." corrections: h h11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the device was not returned.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
SENSICA UO SYSTEM
Type of Device
SENSICA UO SYSTEM
Manufacturer (Section D)
C.R. BARD INC. (COVINGTON) -1018233
8195 industrial blvd
covington 30014
Manufacturer (Section G)
C.R. BARD INC. (COVINGTON) -1018233
8195 industrial blvd
covington 30014
Manufacturer Contact
xeeroy rada
8195 industrial blvd
covington 30014
7707846100
MDR Report Key16475444
MDR Text Key310607779
Report Number1018233-2023-01408
Device Sequence Number1
Product Code EXS
UDI-Device Identifier00801741215612
UDI-Public(01)00801741215612
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
EXEMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Other,Health Professional,User Facility
Reporter Occupation Physician
Type of Report Initial,Followup
Report Date 08/11/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberSCCS1001
Device Catalogue NumberSCCS1001
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 02/10/2023
Initial Date FDA Received03/02/2023
Supplement Dates Manufacturer Received08/11/2023
Supplement Dates FDA Received08/14/2023
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Patient Sequence Number1
Patient Outcome(s) Other;
-
-