• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: DEPUY ORTHOPAEDICS INC US PINN MULTIHOLE W/GRIPTION 50MM; PINNACLE HIP SYSTEM : HIP METAL ACETABULAR CUPS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

DEPUY ORTHOPAEDICS INC US PINN MULTIHOLE W/GRIPTION 50MM; PINNACLE HIP SYSTEM : HIP METAL ACETABULAR CUPS Back to Search Results
Model Number 1217-30-050
Device Problem Adverse Event Without Identified Device or Use Problem (2993)
Patient Problems Adhesion(s) (1695); Foreign Body Reaction (1868); Necrosis (1971); Loss of Range of Motion (2032); Scar Tissue (2060); Synovitis (2094); Deformity/ Disfigurement (2360); Osteolysis (2377); Ambulation Difficulties (2544); Unspecified Musculoskeletal problem (4535); Unspecified Tissue Injury (4559); Swelling/ Edema (4577)
Event Date 03/17/2021
Event Type  Injury  
Manufacturer Narrative
Product complaint # (b)(4).Initial reporter occupation: lawyer.Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
 
Event Description
Pinnacle litigation records received.Patient was revised was due to heavy metal poisoning.Also alleges pain, injuries, metallosis, metal wear, loss of mobility, tissue destruction, limited daily activities, scarring and disfigurement.Doi: (b)(6) 2008 dor: (b)(6) 2021 unk hip.
 
Event Description
Medical records were received and stated the following: the patient was revised to address osteolysis, metallosis, elevated metal ions, pain, crepitus in the hip.Operative note reported there was a gross egress of cloudy fluid consistent with metallosis, large defect of the capsule and external rotators.The abductor were completely necrotic and bone was gray and necrotic.There was corrosion in the femoral head and trunnion, extensive soft tissue muscular damage.Doi: (b)(6) 2008, dor:(b)(6) 2021, left hip.
 
Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
 
Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: no device associated with this report was received for examination.The information received will be retained for potential series investigations if triggered by trend analysis, post market surveillance, or other events within the quality system.Depuy considers the investigation closed.Should additional information be received, the information will be reviewed and the investigation will be re-opened as necessary.Device history lot: the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.
 
Manufacturer Narrative
Product complaint (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: if information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
 
Event Description
Medical records received.After review of the medical record, the patient had elevated metal ion, pain, and crepitus in the hip.Revision notes stated that there was a gross egress of cloudy fluid consistent with metallosis.The abductors were completely necrotic.The head was noted to be corrosion as well as the trunnion.Mri showed joint effusion and synovitis within the pseudo capsule dehiscing into the trochanteric bursa.The abductor cuff was noted to be torn.The patient gets pain when walking, bending, and squatting.
 
Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: pinnacle litigation records received.Patient was revised was due to heavy metal poisoning.Also alleges pain, injuries, metallosis, metal wear, loss of mobility, tissue destruction, limited daily activities, scarring and disfigurement.Doi: (b)(6) 2008.Dor: (b)(6) 2021.Unk hip.The product was not returned to depuy synthes, however photos were provided for review.From pages and attachments"550-551 under file name (b)(4) medical records ad (b)(6) 2023 (2) (2).Pdf; page 13-15, 18-26, 52,66 under file name (b)(4) medical records ad (b)(6) 2023 (1) (2).Pdf; page 10 under file name (b)(4) medical records ad (b)(6) 2023 (1) (3).Pdf; and pages 236- 239, 241-245, 257-259, 263-280 under file name (b)(4) medical records ad (b)(6) 2023 (1) (5).Pdf." all available x-rays were reviewed, and no evidence of implant fracture, disassociation, or anything indicative of a device nonconformance was found.As the device was not returned, an as-received condition could not be assessed, and a dimensional inspection and document/specification review were not completed.The overall complaint was unconfirmed as the observed condition of the [pinn multihole w/gription 50mm] would not contribute to a complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is required.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.H10 additional narrative: added: a4, a6, b5, b7, d4, d6b.
 
Event Description
Medical records received.On (b)(6) 2013 consultation report stated patient plans to have a right total hip arthroplasty on may 6 due to progressive osteoarthritis (no pc required).On (b)(6) 2020 mri was reported to show left hip joint effusion and synovitis with pseudocapsule dehiscing into the trochanteric bursa.February 28th note increased cobalt 6.6 and chromium 7.1.(page 1382 of 6668).On (b)(6) 2021 the patient had a left hip revision to address osteolysis, elevated metal ion levels, pain, crepitus, and metallosis.The surgeon observed that the abductors and bone were necrotic there was corrosion noted on the femoral head as well as the trunnion.The trunnion was cleaned off.A depuy pinnacle constrained +4 liner, and a 28+ 0 biolox delta ceramic femoral head were implanted during this procedure.(surgery page 1333 of 6668).On (b)(6) 2021 patient notes redness and itchiness around the incision site.On (b)(6) 2022 patient had a left hip revision to address dislocation and pain.During the procedure, the surgeon observed significant evidence of residual metal debris and there was clearly evidence of polyethylene wear.It was noted that there was evidence of wear on the ceramic from where the hip had dislocated causing abrasion and loss of the ceramic coating.Depuy components were implanted during this procedure (surgery 1417 and 5548).On (b)(6) 2023 medical records note that the patient reports elevated blood pressure, palpitations, chest pressure, weakness, and fatigue.Shortness of breath.Patient also reports that her kidneys are failing, and patient has ¿chromium in her blood from her hip¿.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
PINN MULTIHOLE W/GRIPTION 50MM
Type of Device
PINNACLE HIP SYSTEM : HIP METAL ACETABULAR CUPS
Manufacturer (Section D)
DEPUY ORTHOPAEDICS INC US
700 orthopaedic drive
warsaw IN 46581 0988
Manufacturer (Section G)
JJM (SUZHOU) LTD. 3006356043
no.299 changyang st
suzhou industrial park
suzhou jiangsu 21512 -6
CH   21512-6
Manufacturer Contact
kate karberg
700 orthopaedic dr.
warsaw, IN 46581-0988
3035526892
MDR Report Key16544489
MDR Text Key311296551
Report Number1818910-2023-05836
Device Sequence Number1
Product Code KWA
UDI-Device Identifier10603295009979
UDI-Public10603295009979
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K093646
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Other
Reporter Occupation Other
Type of Report Initial,Followup,Followup,Followup,Followup
Report Date 03/15/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Expiration Date10/20/2018
Device Model Number1217-30-050
Device Catalogue Number121730050
Device Lot NumberC49FG1000
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? No
Initial Date Manufacturer Received 03/01/2023
Initial Date FDA Received03/15/2023
Supplement Dates Manufacturer Received03/16/2023
03/16/2023
03/28/2023
10/31/2023
Supplement Dates FDA Received03/19/2023
03/21/2023
04/18/2023
11/07/2023
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured10/22/2008
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Treatment
PINN CAN BONE SCREW 6.5MMX15MM; PINN CAN BONE SCREW 6.5MMX15MM; PINN CAN BONE SCREW 6.5MMX15MM; PINN MULTIHOLE W/GRIPTION 50MM; PINNACLE MTL INS NEUT36IDX50OD; S-ROM M HEAD 36MM +0; S-ROM*SLEEVE PRX ZTT, 16B-LRG; SMARTSET GMV 40G US EO; SROM*STM ST,30+4L NK,16X11X150; ZIMMER; ZIMMER; ZIMMER
Patient Outcome(s) Required Intervention;
Patient Age73 YR
Patient SexFemale
Patient Weight63 KG
Patient EthnicityNon Hispanic
Patient RaceWhite
-
-