MAUDE Adverse Event Report: MEDTRONIC NAVIGATION, INC (LITTLETON) O-ARM 1000 IMAGING SYSTEM 3RD EDITION; IMAGE-INTENSIFIED FLUOROSCOPIC X-RAY SYSTEM, M

Model Number BI70000028120

Device Problems Calibration Problem (2890); Application Program Freezes, Becomes Nonfunctional (4031)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/16/2023

Event Type  malfunction  

Manufacturer Narrative

Other relevant device(s) are: product id: bi71000763, product id: bi71000579, product id: bi71000487, ; product id: bi31000129, product id: bi71000648, device evaluated by mfr : no parts have been received by the manufacturer for evaluation.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding an imaging system being used outside of a procedure.It was reported that the medtronic rep resentative was unable to perform the autocal on the small filament, stating that the system became unresponsive and stated that it was "entering calibration" and to "please wait" indefinitely.No patient was present.

Manufacturer Narrative

Additional info: parts (b)(6) are no longer applicable to the event.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Continuation of d10: additional concomitant products added; product id #: bi71000125, product id #: bi71000474, product id #: bi71000481, product id #: bi31000147, product id #: bi71000479, product id #: bi40000025, product id #: bi71000611, and product id #: bi71000447 h3, h6: system service was completed and the system had failed dosimetry testing on pm, and the autocal procedure would not complete.The ht controller, atp board, and generator interface board were replaced.The system was still not able to complete autocal, or take rad exposures.The x-ray tube was replaced, and then the x-ray relay.All calibrations were able to be completed.System now passes dosimetry and image quality tests.Completed system checkout.System is fully functional at this time.B01, c13, and d02 are applicable.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3,h6: a hardware analysis was initiated to determine the probable cause of the reported behavior.Analysis found that there were no failures found.Code b01 is applicable and previously reported.Codes c19,d14 are applicable.Additional info: product bi71000447 that was previously reported is no longer applicable to the event.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3, h6: product bi71000648 was received for analysis.Unable to confirm reported complaint "system becomes unresponsive." installed interface control board in o-arm test system.The system initialized.Motion, generator, communication and charging readied.Rad gain calibration completed.2d and 3d images were successful.B01, c19, and d14 are applicable.H3, h6: product bi71000487 was received for analysis.Confirmed reported issue "system becomes unresponsive".Ht control board was installed on test system.System initialized.During system test, o arm failed to take 3d exposures and 2d images is darken.B01, c13, and d02 are applicable.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3.Hardware analysis of (b)(6) determined that the issue was confirmed.The atp console board passed visual inspection.Board was installed on o-arm test system.System did not fully initialize with continuous beeping, failing system tests.D10 updated: lot number of (b)(6) is s1808thc rev.A.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H2) device evaluation: h3, h6: the lf rac printed circuit board assembly (pcba) was returned to the manufacturer for analysis.The lf rac pcba was found to be fully functional with no problem found.The reported event could not be duplicated by medtronic personnel.B01, c19, d14 are applicable.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM 1000 IMAGING SYSTEM 3RD EDITION
• Type of Device: IMAGE-INTENSIFIED FLUOROSCOPIC X-RAY SYSTEM, M
• Manufacturer (Section D): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• Manufacturer (Section G): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 16590635
• MDR Text Key: 311829206
• Report Number: 3004785967-2023-00163
• Device Sequence Number: 1
• Product Code: OXO
• UDI-Device Identifier: 00643169353428
• UDI-Public: 00643169353428
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K092564
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Company Representative
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date: 06/30/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70000028120
• Device Catalogue Number: BI70000028120
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Initial Date Manufacturer Received: 03/16/2023
• Initial Date FDA Received: 03/22/2023
• Supplement Dates Manufacturer Received: 03/22/2023; 04/20/2023; 05/08/2023; 05/19/2023; 06/13/2023; 06/28/2023
• Supplement Dates FDA Received: 04/06/2023; 04/27/2023; 05/17/2023; 06/05/2023; 06/20/2023; 06/30/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 11/22/2014
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Treatment: "SEE H10...."; SEE H10.