MAUDE Adverse Event Report: MEDOS INTERNATIONAL SARL HD ARTHROSCOPE/SINUSCOPE 4.0MM X 30 DEG X 167MM (MITEK LOCK); RIGID ENDOSCOPE

Model Number 242018

Device Problems Break (1069); Display or Visual Feedback Problem (1184); Device Contaminated During Manufacture or Shipping (2969); Scratched Material (3020)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/07/2023

Event Type  malfunction  

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: udi: (b)(4).Reporter is a j&j sales representative.H4: the device manufacture date is currently unavailable.Investigation summary: the complaint device was received at the manufacturing site and evaluated.During the service evaluation the following defects were identified: outer tube damaged, distal tip damaged,distal tip has deposits.Broken lenses in optical system,field stop defect/field stop loose.Per service reports, this complaint can be confirmed.The defective parts needs to be replaced to resolve the issues.As part of depuy mitek¿s quality process all devices are manufactured, inspected, and released to approved specifications.The faulty parts was identified as the root cause for the device failure during the service evaluation.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post market surveillance.At this point in time, no corrective action is required, and no further action is warranted.Depuy mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.Device history review: manufacturing record evaluation is not required as the reported event is not associated with the manufacturing process and/or the potential cause of the defect cannot be associated to manufacturing.

Event Description

It was reported by the sales rep that during a knee arthroscopy procedure on (b)(6) 2023, it was observed that the.Hd arthroscope/sinuscope 4.0mm x 30 deg x 167mm (mitek lock) device was scratched.During in-house engineering evaluation, it was determined that the distal tip had deposits and there were broken lenses in optical system; and therefore, the device had poor quality image.It was unknown if and how the procedure was completed.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.

• Brand Name: HD ARTHROSCOPE/SINUSCOPE 4.0MM X 30 DEG X 167MM (MITEK LOCK)
• Type of Device: RIGID ENDOSCOPE
• Manufacturer (Section D): MEDOS INTERNATIONAL SARL; chemin blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer (Section G): MEDOS INTERNATIONAL SARL; chemin-blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 16823686
• MDR Text Key: 314100984
• Report Number: 1221934-2023-01853
• Device Sequence Number: 1
• Product Code: HRX
• UDI-Device Identifier: 10886705029150
• UDI-Public: 10886705029150
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K080560
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 242018
• Device Catalogue Number: 242018
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/24/2023
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 04/19/2023
• Initial Date FDA Received: 04/27/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1