Catalog Number 11403101 |
Device Problem
Fracture (1260)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 04/04/2023 |
Event Type
malfunction
|
Event Description
|
At the start of the procedure, when opening the nevertouch direct procedure kit kit, the fiber appeared as expected.When the fiber was inserted into the patient's vein, there were no noted issues.The provider started the burn, with the unit showing energy, however, the fiber was not burning as expected.The provider removed the fiber, at which time the fiber broke into three pieces.It was reported that no part of the fiber had been retained inside the patient, therefore no additional intervention was needed such as cut down or snare.The procedure was completed with another of the same device/kit.It was reported the patient did not experience any adverse effects, harm, or require medical intervention because of this incident.
|
|
Manufacturer Narrative
|
The device is not available to be returned to the manufacturer for evaluation.The results of the investigation will be sent via a follow up medwatch.Reference (b)(4).
|
|
Manufacturer Narrative
|
As the reported device was not returned, angiodynamics is unable to perform a device evaluation.However, the end user supplied a photograph of the fractured fiber for analysis.The customer's reported complaint of the fiber fractured and detached was confirmed based on the pictures provided by the end user.Although the complaint description was confirmed, a definitive root cause cannot be determined since the complaint sample was not returned for evaluation.The root cause of the fiber fractures and detachment cannot be confirmed based on the picture provided.A potential root cause for this type of fracture/detachment failure mode is a fracture of the fiber core due to handling damage, which allow laser energy to escape at the fracture site and eventually results in fiber detachment.A review of the device history records was performed for the indicated lots for any deviations related to the reported failure mode of the complaint. the review confirms that the lots met all material, assembly and performance specifications; i.E.No ncr associated with reported failure mode.During the manufacturing process, the disposable fiber device receives a 100% inspection and an aql inspection in which the quality of the fiber strip is inspected.Prior to packaging, all components are inspected for damage.Labeling review: the instructions for use which is supplied to the end user with this catalog number contains the following statement "avoid damaging the fiber by striking, stressing or excessive bending.Do not coil the fiber tighter than a diameter of 16cm.".A review of the angiodynamics complaint system noted no adverse trends for this complaint type and product family.This type of complaint will continue to be monitored for trends.Reference (b)(4).
|
|
Search Alerts/Recalls
|
|